Home › Suspension › FRONT SUSPENSION › FRONT STABILIZER BAR (w/ Electronic-Kinetic Dynamic Suspension System) › from 2021.07
RM38G0E _53 Suspension _102028 FRONT SUSPENSION _0473052 FRONT STABILIZER BAR(w/ Electronic-Kinetic Dynamic Suspension System) A

FRONT SUSPENSION  FRONT STABILIZER BAR(w/ Electronic-Kinetic Dynamic Suspension System)  INSTALLATION  


CAUTION / NOTICE / HINT

COMPONENTS (INSTALLATION)
C404210N01
1.021,3.313 1.76,3.552 0.74,0.24 0.958,3.25 1.823,3.615 0.865,0.365 6,1.792 6.74,2.031 0.74,0.24 5.938,1.729 6.802,2.094 0.865,0.365 4.854,5.458 5.667,5.771 0.813,0.313 4.906,5.51 5.615,5.719 0.708,0.208 5.448,4.875 6.156,5.083 0.708,0.208 5.396,4.823 6.208,5.135 0.813,0.313 3.813,4.958 4.521,5.167 0.708,0.208 3.76,4.906 4.573,5.219 0.813,0.313 5.667,3.896 6.375,4.104 0.708,0.208 5.615,3.844 6.427,4.156 0.813,0.313 5.792,2.417 6.677,2.625 0.885,0.208 5.74,2.354 6.729,2.677 0.99,0.323 0.146,4.469 1.031,4.677 0.885,0.208 0.104,4.406 1.094,4.729 0.99,0.323 3.5,5.427 4.385,5.635 0.885,0.208 3.448,5.375 4.438,5.698 0.99,0.323 3.281,2.479 4.167,2.688 0.885,0.208 3.229,2.427 4.219,2.75 0.99,0.323 5.844,3.01 6.552,3.219 0.708,0.208 5.792,2.958 6.604,3.271 0.813,0.313 1.667,0.813 2.531,1.24 0.865,0.427 1.615,0.76 2.583,1.292 0.969,0.531 5.219,3.417 5.635,3.417 true 2.875,4.281 3.292,4.281 true 5.177,4.385 5.594,4.385 true 3.792,3.073 3.969,3.073 3.969,3.073 4.073,3.406 true 2.885,0.917 2.719,0.917 2.719,0.917 2.719,1.583 true 1.823,2.635 1.969,2.875 1.969,2.875 2.156,2.875 true 4.177,1.51 4.875,1.51 true 1.573,5.417 1.906,5.417 1.906,5.417 2.323,5.333 true 4.833,0.167 5.667,0.167 5.667,0.167 6.396,0.969 false 1,1.417 1.365,1 1.365,1 1.5,1 false 1,1.583 1.5,1 1.5,1 1.667,1 false 5.583,0.417 5.479,0.177 false 5.563,0.823 5.563,0.979 5.563,0.979 5.74,0.979 false 6.125,1.333 6.344,1.333 false 0.781,2.604 0.781,3.417 0.781,3.417 1.01,3.417 false 4.865,5.615 4.729,5.615 4.729,5.615 4.729,5.323 false 5.031,4.979 5.438,4.979 true 3.813,5.073 3.625,5.073 3.625,5.073 3.625,4.906 false 5.24,3.99 5.646,3.99 true 6,1.906 5.865,1.906 5.865,1.906 5.865,1.615 false 5.781,2.521 5.458,2.521 5.458,2.521 5.458,2.208 false 1.042,4.573 1.365,4.573 true 3.271,5.531 3.49,5.531 true 3.719,2.219 3.719,2.469 true 6.146,0.198 6.979,0.198 6.979,0.198 6.979,3.135 false 6.823,0.792 6.969,0.792 false 6.563,3.125 6.979,3.125 true 0.792,1.323 0.792,0.521 0.792,0.521 0.927,0.521 false 0.906,1.979 0.771,1.979 0.771,1.979 0.771,1.521 false 0.99,0.427 1.302,0.625 0.313,0.198 10 false *1 4.563,0.083 4.875,0.281 0.313,0.198 10 false *1 2.583,4.188 2.896,4.385 0.313,0.198 10 false *2 5.698,3.323 6.01,3.521 0.313,0.198 10 false *2 5.969,1.208 6.177,1.438 0.208,0.229 10 true ● 2.948,0.802 3.281,1.135 0.333,0.333 18 false 5 1.26,5.26 1.594,5.594 0.333,0.333 18 false 6 5.656,4.229 5.99,4.563 0.333,0.333 18 false 4 3.469,2.917 3.802,3.25 0.333,0.333 18 false 3 3.917,1.375 4.25,1.708 0.333,0.333 18 false 1 2.521,2.708 2.938,3.01 0.417,0.302 18 false 2 5.26,4.021 5.719,4.219 0.458,0.198 10 false x 2 3.719,4.698 4.177,4.896 0.458,0.198 10 false x 2 4.833,5.208 5.292,5.406 0.458,0.198 10 false x 2 5.146,4.677 5.604,4.875 0.458,0.198 10 false x 4 0.875,2.604 1.333,2.802 0.458,0.198 10 false x 4 5.958,1.51 6.417,1.708 0.458,0.198 10 false x 4 1.073,3.354 1.771,3.521 0.698,0.167 8 false 86 (877, 63) 6.042,1.833 6.74,2 0.698,0.167 8 false 86 (877, 63) 5.781,0.865 6.042,1.104 0.26,0.24 10 false ● 4.938,5.542 5.635,5.708 0.698,0.167 8 false 52 (530, 38) 5.49,4.885 6.188,5.052 0.698,0.167 8 false 52 (530, 38) 3.865,4.99 4.563,5.156 0.698,0.167 8 false 52 (530, 38) 5.729,3.917 6.427,4.083 0.698,0.167 8 false 52 (530, 38) 5.844,2.448 6.688,2.625 0.844,0.177 8 false 190 (1937, 140) 0.167,4.49 1.01,4.667 0.844,0.177 8 false 190 (1937, 140) 3.531,5.448 4.417,5.635 0.885,0.188 8 false 140 (1428, 103) 3.292,2.5 4.177,2.688 0.885,0.188 8 false 140 (1428, 103) 5.896,3.042 6.594,3.208 0.698,0.167 8 false 50 (510, 37) 0.969,1.885 1.281,2.083 0.313,0.198 10 false *1 1.708,0.844 2.49,1.021 0.781,0.177 8 false 44.1 (450, 33) 1.708,1.031 2.49,1.208 0.781,0.177 8 false 39.5 (403, 29)*

Procedure Part Name Code
Z101186

Z101188

Z101187

1 FRONT STABILIZER CONTROL CYLINDER LH 48878 (Click here) - -
2 FRONT STABILIZER CONTROL CYLINDER 48876 (Click here) - -
3 FRONT STABILIZER BAR 48811 - - -
4 FRONT CENTER STABILIZAR BRACE SUB-ASSEMBLY 48806C - - -
5 FRONT STABILIZER LINK ASSEMBLY LH 48810 - - -
6 FRONT STABILIZER LINK ASSEMBLY RH 48820B - - -

*1 SUSPENSION CONTROL TUBE *2 FRONT STABILIZER BRACKET
V111893

Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf) * For use with a union nut wrench
● Non-reusable part - -

C454023N02
2.323,2.917 3.125,2.917 true 3.115,1.063 3.74,1.063 true 0.958,1.792 1.24,2.25 1.24,2.25 1.406,2.25 true 6,1.333 6,0.75 6,0.75 6.167,0.75 true 6.219,0.583 6.615,0.906 0.396,0.323 18 false 10 1.833,2.073 2.115,2.427 0.281,0.354 18 false 9 2.052,2.792 2.333,3.146 0.281,0.354 18 false 8 4.177,0.875 4.458,1.229 0.281,0.354 18 false 7 4.177,2.365 4.635,2.563 0.458,0.198 10 false x 3 0.75,0.135 1.208,0.333 0.458,0.198 10 false x 3

Procedure Part Name Code
Z101186

Z101188

Z101187

7 FRONT STABILIZER HOUSING SUB-ASSEMBLY 48006 (Click here) - -
8 FRONT FENDER APRON TRIM PACKING A 53782 (Click here) - -
9 FRONT FENDER APRON TRIM PACKING C 53784 (Click here) - -
10 FRONT WHEEL - - - -

PROCEDURE

Hide 48878 1.INSTALL FRONT STABILIZER CONTROL CYLINDER LH

Z101186

HINT:

Perform this procedure only when replacement of the front stabilizer control cylinder LH is necessary.



a.
C404208C01
2.583,0.385 3.115,0.396 3.115,0.396 2.542,0.25 true 0.396,0.052 1.01,0.354 0.615,0.302 18 true i - iii 1.635,0.771 1.792,0.969 0.156,0.198 10 true A 2.521,0.781 2.677,0.979 0.156,0.198 10 true A 2.521,1.094 2.677,1.292 0.156,0.198 10 true A 1.583,1.073 1.74,1.271 0.156,0.198 10 true A 1.875,0.438 2.031,0.635 0.156,0.198 10 true B 1.938,0.208 2.094,0.406 0.156,0.198 10 true B 3.146,0.302 3.396,0.5 0.25,0.198 10 true *1
*1 Suspension Control Tubes - -
V113148

Install in this Direction - -


i.

Connect the front stabilizer control cylinder LH as shown in the illustlation.


ii.

Install the front stabilizer control cylinder LH with 4 bolts (A).

Torque:
86 N*m (877 kgf*cm, 63 ft.*lbf)


iii.

Connect the 2 suspension control tubes with 2 new gaskets and 2 bolts (B).

Torque:
50 N*m (510 kgf*cm, 37 ft.*lbf)



Hide 48876 2.INSTALL FRONT STABILIZER CONTROL CYLINDER

Z101186

HINT:

Perform this procedure only when replacement of the front stabilizer control cylinder is necessary.



a.
C404209C01
0.708,1.281 0.854,1.281 0.854,1.281 0.917,0.958 true 1.99,2.281 2.771,2 2.771,2 1.958,2.094 true 0.333,0.042 1.073,0.344 0.74,0.302 18 true i - iii 1.573,1.229 1.885,1.427 0.313,0.198 10 false *a 0.427,1.188 0.74,1.385 0.313,0.198 10 false *b 2.802,1.896 3.125,2.115 0.323,0.219 10 true *1
*1 Suspension Control Tubes - -
*a Torque Wrench Fulcrum Length *b Union Nut Wrench
V113148

Install in this Direction - -


i.

Connect the front stabilizer control cylinder as shown in the illustlation.


ii.

Install the front stabilizer control cylinder with 4 bolts.

Torque:
86 N*m (877 kgf*cm, 63 ft.*lbf)


iii.

Using a union nut wrench, connect the 2 suspension control tubes.

Torque:
Specified tightening torque : 44.1 N*m (450 kgf*cm, 33 ft.*lbf)

HINT:
·

Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION

·

When using a union nut wrench (fulcrum length of 30 mm (1.181 in.)) + torque wrench (fulcrum length of 255 mm (10.039 in.)): 39.5 N*m (403 kgf*cm, 29 ft.*lbf)





Hide 48811 3.INSTALL FRONT STABILIZER BAR

Torque:
52 N*m (530 kgf*cm, 38 ft.*lbf)

Hide 48806C 4.INSTALL FRONT CENTER STABILIZAR BRACE SUB-ASSEMBLY

Torque:
52 N*m (530 kgf*cm, 38 ft.*lbf)

Hide 48810 5.INSTALL FRONT STABILIZER LINK ASSEMBLY LH

Torque:
for upper side : 190 N*m (1937 kgf*cm, 140 ft.*lbf)
for lower side : 140 N*m (1428 kgf*cm, 103 ft.*lbf)

Hide 48820B 6.INSTALL FRONT STABILIZER LINK ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 48006 7.INSTALL FRONT STABILIZER HOUSING SUB-ASSEMBLY

Z101186

HINT:

Perform this procedure only when replacement of the front stabilizer control cylinder or front stabilizer control cylinder LH are necessary.



Click hereSuspension>SUSPENSION CONTROL>STABILIZER CONTROL VALVE (for Front Side)>INSTALLATION

Hide 53782 8.INSTALL FRONT FENDER APRON TRIM PACKING A

Z101186

HINT:

Perform this procedure only when replacement of the front stabilizer control cylinder or front stabilizer control cylinder LH are necessary.




Hide 53784 9.INSTALL FRONT FENDER APRON TRIM PACKING C

Z101186

HINT:

Perform this procedure only when replacement of the front stabilizer control cylinder or front stabilizer control cylinder LH are necessary.




Hide 10.INSTALL FRONT WHEEL