Home › ADAS / AD › ADVANCED DRIVER ASSISTANCE SYSTEM › DYNAMIC RADAR CRUISE CONTROL SYSTEM › from 2021.07
RM38G0E _95 ADAS / AD _100650 ADVANCED DRIVER ASSISTANCE SYSTEM _0469138 DYNAMIC RADAR CRUISE CONTROL SYSTEM C

ADVANCED DRIVER ASSISTANCE SYSTEM  DYNAMIC RADAR CRUISE CONTROL SYSTEM  P160700  Cruise Control Input Processor  


DESCRIPTION

When the ECM detects that it is not functioning normally, DTC P160700 is stored.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
P160700 Cruise Control Input Processor When the ignition switch is ON and control of vehicle speed by the dynamic radar cruise control system is prohibited by the sub-CPU, the dynamic radar cruise control system operates for 0.3 seconds or more. ECM Cruise Control A

CAUTION / NOTICE / HINT

NOTICE:

Before replacing the ECM, refer to Service Bulletin.


HINT:

Read the freeze frame data using the GTS. When a malfunction is detected, various engine control parameters are stored as freeze frame data and can be useful for troubleshooting.


PROCEDURE

1.CHECK FOR DTCs (Radar Cruise1)

Pre-procedure1

a.

Clear the DTCs.

Powertrain > Cruise Control > Clear DTCs
50002 374

b.

Make sure that the DTC detection conditions are met.

HINT:

If the detection conditions are not met, the system cannot detect the malfunction.



Procedure1

c.

Check for DTCs.

Powertrain > Cruise Control > Trouble Codes
50001 374
Result:
Result Proceed to
DTC P160700 is not output A
DTC P160700 is output B



Post-procedure1

d.

None



A

B