| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | FRONT EXHAUST PIPE SUB-ASSEMBLY | 17401 | - | - | - |
| 2 | AIR FUEL RATIO SENSOR | 89467B | ( ) |
- | - |
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during air fuel ratio sensor removal/installation are shown below.
Do not reuse the sensor which has been dropped or taken on a strong impact.
Do not pull and twist the sensor wire strongly.
17401 1.REMOVE FRONT EXHAUST PIPE SUB-ASSEMBLY
89467B 2.REMOVE AIR FUEL RATIO SENSOR
Using SST, loosen the sensor probe and remove the air fuel ratio sensor.