Home › Engine / Hybrid System › F33A-FTV (ENGINE CONTROL) › ECD SYSTEM (w/o DPF) › from 2021.07
RM38G0E _51 Engine / Hybrid System _106329 F33A-FTV ENGINE CONTROL _0484891 ECD SYSTEM(w/o DPF) C

F33A-FTV ENGINE CONTROL  ECD SYSTEM(w/o DPF)  P13A011  Fuel Pressure Sensor #1(Sub CPU) Circuit Short to Ground  P13A015  Fuel Pressure Sensor #1(Sub CPU) Circuit Short to Battery or Open  P13A02A  Fuel Pressure Sensor #1(Sub CPU) Signal Stuck in Range  P13A511  Fuel Pressure Sensor #2(Sub CPU) Circuit Short to Ground  P13A515  Fuel Pressure Sensor #2(Sub CPU) Circuit Short to Battery or Open  P13A52A  Fuel Pressure Sensor #2(Sub CPU) Signal Stuck in Range  P13AA11  Fuel Pressure Sensor #3(Sub CPU) Circuit Short to Ground  P13AA15  Fuel Pressure Sensor #3(Sub CPU) Circuit Short to Battery or Open  P13AA2A  Fuel Pressure Sensor #3(Sub CPU) Signal Stuck in Range  P13B011  Fuel Pressure Sensor #4(Sub CPU) Circuit Short to Ground  P13B015  Fuel Pressure Sensor #4(Sub CPU) Circuit Short to Battery or Open  P13B02A  Fuel Pressure Sensor #4(Sub CPU) Signal Stuck in Range  P13B511  Fuel Pressure Sensor #5 (Sub CPU) Circuit Short to Ground  P13B515  Fuel Pressure Sensor #5 (Sub CPU) Circuit Short to Battery or Open  P13B52A  Fuel Pressure Sensor #5 (Sub CPU) Signal Stuck In Range  P13BA11  Fuel Pressure Sensor #6 (Sub CPU) Circuit Short to Ground  P13BA15  Fuel Pressure Sensor #6 (Sub CPU) Circuit Short to Battery or Open  P13BA2A  Fuel Pressure Sensor #6 (Sub CPU) Signal Stuck In Range  P13E011  Fuel Pressure Sensor #1(Main CPU) Circuit Short to Ground  P13E015  Fuel Pressure Sensor #1(Main CPU) Circuit Short to Battery or Open  P13E511  Fuel Pressure Sensor #4(Main CPU) Circuit Short to Ground  P13E515  Fuel Pressure Sensor #4(Main CPU) Circuit Short to Battery or Open  


DESCRIPTION

A fuel pressure sensor, which is built into the injector assembly, converts the fuel pressure to an electrical signal which is sent to the ECM. Based on this signal, the ECM controls the fuel supply pump assembly and maintains the fuel pressure in the common rail assembly at the target pressure. A semiconductor is used in the fuel pressure sensor. The semiconductor changes its internal resistance value according to the fuel pressure, and as a result, the output voltage is proportional to the fuel pressure.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Note
P13A011 Fuel Pressure Sensor #1(Sub CPU) Circuit Short to Ground Sub CPU Side:
The output voltage of the fuel pressure sensor is 0.55 V or less for 0.5 seconds or more.
(1 trip detection logic)
·

Open or short in fuel pressure sensor (built into injector assembly) circuit

·

Fuel pressure sensor (built into injector assembly)

·

ECM


Comes on SAE Code: P13A1
P13A015 Fuel Pressure Sensor #1(Sub CPU) Circuit Short to Battery or Open Sub CPU Side:
The output voltage of the fuel pressure sensor is 4.76 V or higher for 0.5 seconds or more.
(1 trip detection logic)
·

Open or short in fuel pressure sensor (built into injector assembly) circuit

·

Fuel pressure sensor (built into injector assembly)

·

ECM


Comes on SAE Code: P13A2
P13A02A Fuel Pressure Sensor #1(Sub CPU) Signal Stuck in Range The output of the fuel pressure sensor differs by 42 MPa or more compared to other cylinders for 0.5 seconds or more.
(1 trip detection logic)
·

Open or short in fuel pressure sensor (built into injector assembly) circuit

·

Fuel pressure sensor (built into injector assembly)

·

ECM


Comes on SAE Code: P13A3
P13A511 Fuel Pressure Sensor #2(Sub CPU) Circuit Short to Ground Sub CPU Side:
The output voltage of the fuel pressure sensor is 0.55 V or less for 0.5 seconds or more.
(1 trip detection logic)
·

Open or short in fuel pressure sensor (built into injector assembly) circuit

·

Fuel pressure sensor (built into injector assembly)

·

ECM


Comes on SAE Code: P13A6
P13A515 Fuel Pressure Sensor #2(Sub CPU) Circuit Short to Battery or Open Sub CPU Side:
The output voltage of the fuel pressure sensor is 4.76 V or higher for 0.5 seconds or more.
(1 trip detection logic)
·

Open or short in fuel pressure sensor (built into injector assembly) circuit

·

Fuel pressure sensor (built into injector assembly)

·

ECM


Comes on SAE Code: P13A7
P13A52A Fuel Pressure Sensor #2(Sub CPU) Signal Stuck in Range The output of the fuel pressure sensor differs by 42 MPa or more compared to other cylinders for 0.5 seconds or more.
(1 trip detection logic)
·

Open or short in fuel pressure sensor (built into injector assembly) circuit

·

Fuel pressure sensor (built into injector assembly)

·

ECM


Comes on SAE Code: P13A8
P13AA11 Fuel Pressure Sensor #3(Sub CPU) Circuit Short to Ground Sub CPU Side:
The output voltage of the fuel pressure sensor is 0.55 V or less for 0.5 seconds or more.
(1 trip detection logic)
·

Open or short in fuel pressure sensor (built into injector assembly) circuit

·

Fuel pressure sensor (built into injector assembly)

·

ECM


Comes on SAE Code: P13AB
P13AA15 Fuel Pressure Sensor #3(Sub CPU) Circuit Short to Battery or Open Sub CPU Side:
The output voltage of the fuel pressure sensor is 4.76 V or higher for 0.5 seconds or more.
(1 trip detection logic)
·

Open or short in fuel pressure sensor (built into injector assembly) circuit

·

Fuel pressure sensor (built into injector assembly)

·

ECM


Comes on SAE Code: P13AC
P13AA2A Fuel Pressure Sensor #3(Sub CPU) Signal Stuck in Range The output of the fuel pressure sensor differs by 42 MPa or more compared to other cylinders for 0.5 seconds or more.
(1 trip detection logic)
·

Open or short in fuel pressure sensor (built into injector assembly) circuit

·

Fuel pressure sensor (built into injector assembly)

·

ECM


Comes on SAE Code: P13AD
P13B011 Fuel Pressure Sensor #4(Sub CPU) Circuit Short to Ground Sub CPU Side:
The output voltage of the fuel pressure sensor is 0.55 V or less for 0.5 seconds or more.
(1 trip detection logic)
·

Open or short in fuel pressure sensor (built into injector assembly) circuit

·

Fuel pressure sensor (built into injector assembly)

·

ECM


Comes on SAE Code: P13B1
P13B015 Fuel Pressure Sensor #4(Sub CPU) Circuit Short to Battery or Open Sub CPU Side:
The output voltage of the fuel pressure sensor is 4.76 V or higher for 0.5 seconds or more.
(1 trip detection logic)
·

Open or short in fuel pressure sensor (built into injector assembly) circuit

·

Fuel pressure sensor (built into injector assembly)

·

ECM


Comes on SAE Code: P13B2
P13B02A Fuel Pressure Sensor #4(Sub CPU) Signal Stuck in Range The output of the fuel pressure sensor differs by 42 MPa or more compared to other cylinders for 0.5 seconds or more.
(1 trip detection logic)
·

Open or short in fuel pressure sensor (built into injector assembly) circuit

·

Fuel pressure sensor (built into injector assembly)

·

ECM


Comes on SAE Code: P13B3
P13B511 Fuel Pressure Sensor #5 (Sub CPU) Circuit Short to Ground Sub CPU Side:
The output voltage of the fuel pressure sensor is 0.55 V or less for 0.5 seconds or more.
(1 trip detection logic)
·

Open or short in fuel pressure sensor (built into injector assembly) circuit

·

Fuel pressure sensor (built into injector assembly)

·

ECM


Comes on SAE Code: P13B6
P13B515 Fuel Pressure Sensor #5 (Sub CPU) Circuit Short to Battery or Open Sub CPU Side:
The output voltage of the fuel pressure sensor is 4.76 V or higher for 0.5 seconds or more.
(1 trip detection logic)
·

Open or short in fuel pressure sensor (built into injector assembly) circuit

·

Fuel pressure sensor (built into injector assembly)

·

ECM


Comes on SAE Code: P13B7
P13B52A Fuel Pressure Sensor #5 (Sub CPU) Signal Stuck In Range The output of the fuel pressure sensor differs by 42 MPa or more compared to other cylinders for 0.5 seconds or more.
(1 trip detection logic)
·

Open or short in fuel pressure sensor (built into injector assembly) circuit

·

Fuel pressure sensor (built into injector assembly)

·

ECM


Comes on SAE Code: P13B8
P13BA11 Fuel Pressure Sensor #6 (Sub CPU) Circuit Short to Ground Sub CPU Side:
The output voltage of the fuel pressure sensor is 0.55 V or less for 0.5 seconds or more.
(1 trip detection logic)
·

Open or short in fuel pressure sensor (built into injector assembly) circuit

·

Fuel pressure sensor (built into injector assembly)

·

ECM


Comes on SAE Code: P13BB
P13BA15 Fuel Pressure Sensor #6 (Sub CPU) Circuit Short to Battery or Open Sub CPU Side:
The output voltage of the fuel pressure sensor is 4.76 V or higher for 0.5 seconds or more.
(1 trip detection logic)
·

Open or short in fuel pressure sensor (built into injector assembly) circuit

·

Fuel pressure sensor (built into injector assembly)

·

ECM


Comes on SAE Code: P13BC
P13BA2A Fuel Pressure Sensor #6 (Sub CPU) Signal Stuck In Range The output of the fuel pressure sensor differs by 42 MPa or more compared to other cylinders for 0.5 seconds or more.
(1 trip detection logic)
·

Open or short in fuel pressure sensor (built into injector assembly) circuit

·

Fuel pressure sensor (built into injector assembly)

·

ECM


Comes on SAE Code: P13BD
P13E011 Fuel Pressure Sensor #1(Main CPU) Circuit Short to Ground Main CPU Side:
The fuel pressure sensor output voltage of injector #1 and/or #4 is below 0.55 V for 3 seconds or more.
(1 trip detection logic)
·

Open or short in fuel pressure sensor (built into injector assembly) circuit

·

Fuel pressure sensor (built into injector assembly)

·

ECM


Comes on SAE Code: P13E1
P13E015 Fuel Pressure Sensor #1(Main CPU) Circuit Short to Battery or Open Main CPU Side:
The fuel pressure sensor output voltage of injector #1 and/or #4 is higher than 4.76 V for 3 seconds or more.
(1 trip detection logic)
·

Open or short in fuel pressure sensor (built into injector assembly) circuit

·

Fuel pressure sensor (built into injector assembly)

·

ECM


Comes on SAE Code: P13E2
P13E511 Fuel Pressure Sensor #4(Main CPU) Circuit Short to Ground Main CPU Side:
The fuel pressure sensor output voltage of injector #1 and/or #4 is below 0.55 V for 3 seconds or more.
(1 trip detection logic)
·

Open or short in fuel pressure sensor (built into injector assembly) circuit

·

Fuel pressure sensor (built into injector assembly)

·

ECM


Comes on SAE Code: P13E6
P13E515 Fuel Pressure Sensor #4(Main CPU) Circuit Short to Battery or Open Main CPU Side:
The fuel pressure sensor output voltage of injector #1 and/or #4 is higher than 4.76 V for 3 seconds or more.
(1 trip detection logic)
·

Open or short in fuel pressure sensor (built into injector assembly) circuit

·

Fuel pressure sensor (built into injector assembly)

·

ECM


Comes on SAE Code: P13E7

Related Data List
DTC No. Data List
P13A011
P13A015
P13A511
P13A515
P13AA11
P13AA15
P13B011
P13B015
P13B511
P13B515
P13BA11
P13BA15
·

Fuel Pressure #1

·

Fuel Pressure #2

·

Fuel Pressure #3

·

Fuel Pressure #4

·

Fuel Pressure #5

·

Fuel Pressure #6


P13E011
P13E015
P13E511
P13E515
P13A02A
P13A52A
P13AA2A
P13B02A
P13B52A
P13BA12

HINT:
·

Check Common Rail Pressure and compare it to Target Common Rail Pressure in the Data List by entering the following menus: Powertrain / Engine / Data List / Fuel Pressure (High), Target Fuel Pressure (High). Under stable conditions, the difference between "Fuel Pressure (High)" and "Target Fuel Pressure (High)" is 3500 kPag or less.

·

If DTC P13A011, P13A015, P13A02A, P13A511, P13A515, P13A52A, P13AA11, P13AA15, P13AA2A, P13B011, P13B015, P13B02A, P13B511, P13B515, P13B52A, P13BA11, P13BA15, P13BA2A, P13E011, P13E015, P13E511 and/or P13E515 is stored, the following symptom may appear:

-

Lack of power due to accelerator restriction performed by fail-safe function




CONFIRMATION DRIVING PATTERN

DTC No. DTC Detection Drive Pattern
P13A011
P13A015
P13A511
P13A515
P13AA11
P13AA15
P13B011
P13B015
P13B511
P13B515
P13BA11
P13BA15
Ignition switch ON for 1 second or more
P13E011
P13E015
P13E511
P13E515
Ignition switch ON for 8 seconds or more
P13A02A
P13A52A
P13AA2A
P13B02A
P13B52A
P13BA2A
After idling for 60 seconds, quickly increase engine speed to 2500 rpm repeatedly for 30 seconds

MONITOR DESCRIPTION

A492902E01
1.365,5.573 3.292,6.177 true 3.708,2.24 3.26,0.229 3.26,0.229 3.667,0.229 true 1.104,1 2.021,1.198 0.917,0.198 10 false Main CPU 1.094,2.552 2.01,2.75 0.917,0.198 10 false Sub CPU 1.74,2.865 2.052,3.063 0.313,0.198 10 false #1 0.938,1.677 1.25,1.875 0.313,0.198 10 false #1 0.938,1.344 1.25,1.542 0.313,0.198 10 false #4 1.74,4.177 2.052,4.375 0.313,0.198 10 false #4 1.729,3.51 2.042,3.708 0.313,0.198 10 false #2 1.74,3.854 2.052,4.052 0.313,0.198 10 false #3 1.74,4.479 2.052,4.677 0.313,0.198 10 false #5 1.729,4.844 2.042,5.042 0.313,0.198 10 false #6 2.229,2.323 3.146,2.521 0.917,0.198 10 false 5 V 2.76,2.656 3.677,2.854 0.917,0.198 10 false VIJ1 2.771,2.99 3.688,3.188 0.917,0.198 10 false PIJ1 2.771,3.323 3.688,3.521 0.917,0.198 10 false EIJ1 2.771,3.615 3.688,3.813 0.917,0.198 10 false PIJ2 2.76,3.958 3.677,4.156 0.917,0.198 10 false PIJ3 2.76,4.292 3.677,4.49 0.917,0.198 10 false PIJ4 2.76,4.625 3.677,4.823 0.917,0.198 10 false PIJ5 2.76,4.948 3.677,5.146 0.917,0.198 10 false PIJ6 5.583,1.292 7.094,1.677 1.51,0.385 10 false No. 1 Injector Assembly 3.365,6.135 6.583,6.5 3.219,0.365 10 false Stores P13E011, P13E015, P13E511, P13E515 3.844,0.156 7.063,1.281 3.219,1.125 10 false Stores P13A011, P13A015, P13A511, P13A515, P13AA11, P13AA15, P13B011, P13B015, P13B511, P13B515, P13BA11, P13BA15, P13E011, P13E015, P13E511, P13E515 4.573,3.5 6.229,3.719 1.656,0.219 10 false No. 2 Injector Assembly 4.573,3.823 6.229,4.042 1.656,0.219 10 false No. 3 Injector Assembly 4.573,4.167 6.229,4.385 1.656,0.219 10 false No. 4 Injector Assembly 4.573,4.51 6.229,4.729 1.656,0.219 10 false No. 5 Injector Assembly 4.563,4.844 6.219,5.063 1.656,0.219 10 false No. 6 Injector Assembly

P13A011, P13A015, P13A02A, P13A511, P13A515, P13A52A, P13AA11, P13AA15, P13AA2A, P13B011, P13B015, P13B02A, P13B511, P13B515, P13B52A, P13BA11, P13BA15, P13BA2A, P13E011, P13E015, P13E511 and/or P13E515 (Open or short in fuel pressure sensor circuit):

If the fuel pressure sensor output voltage is outside of the standard range due to an open or short in the fuel pressure sensor circuit, DTCs are stored.

If a DTC is stored, the ECM enters fail-safe mode, and engine output is limited only if 2 or more circuits are malfunctioning. The ECM continues operating in fail-safe mode until the ignition switch is turned off.

The No. 1 injector assembly and No. 4 injector assembly have separate circuits inside the ECU and a fuel pressure sensor value is input to both the Main CPU and Sub CPU.

HINT:

When there is an open circuit in EIJ or VIJ, DTC P13E015 and P13A015 are output at the same time.

If only one of them are output, there may be an open in the internal circuit of the ECM.



WIRING DIAGRAM

A492044E01
1.875,5.302 2.49,5.5 0.615,0.198 10 false C119 1.885,5.469 4.979,5.76 3.094,0.292 10 false Fuel Pressure Sensor (No. 3 Injector Assembly) 1.885,7.146 2.5,7.344 0.615,0.198 10 false C120 1.875,7.313 5.135,7.615 3.26,0.302 10 false Fuel Pressure Sensor (No. 4 Injector Assembly) 1.865,3.458 2.479,3.656 0.615,0.198 10 false C118 1.885,1.604 2.5,1.802 0.615,0.198 10 false C117 1.885,1.76 4.958,2.01 3.073,0.25 10 false Fuel Pressure Sensor (No. 1 Injector Assembly) 1.854,3.615 5.031,3.896 3.177,0.281 10 false Fuel Pressure Sensor (No. 2 Injector Assembly) 2.896,0.875 3.51,1.073 0.615,0.198 10 false PIJ1 2.896,1.26 3.51,1.458 0.615,0.198 10 false EIJ1 2,0.885 2.615,1.083 0.615,0.198 10 false CINJ 5.885,0.469 6.5,0.667 0.615,0.198 10 false VIJ1 5.885,0.854 6.5,1.052 0.615,0.198 10 false PIJ1 5.865,7.76 6.479,7.958 0.615,0.198 10 false CINJ 2,2.729 2.615,2.927 0.615,0.198 10 false CIJ2 2,4.615 2.615,4.813 0.615,0.198 10 false CIJ3 1.99,6.458 2.604,6.656 0.615,0.198 10 false CIJ4 2.896,0.469 3.51,0.667 0.615,0.198 10 false VIJ1 5.875,1.271 6.49,1.469 0.615,0.198 10 false EIJ1 2.896,3.115 3.51,3.313 0.615,0.198 10 false EIJ2 2.885,4.969 3.5,5.167 0.615,0.198 10 false EIJ3 2.875,6.823 3.49,7.021 0.615,0.198 10 false EIJ4 2.896,2.719 3.51,2.917 0.615,0.198 10 false PIJ2 2.885,4.573 3.5,4.771 0.615,0.198 10 false PIJ3 2.875,6.427 3.49,6.625 0.615,0.198 10 false PIJ4 2.906,2.333 3.521,2.531 0.615,0.198 10 false VIJ2 2.885,4.156 3.5,4.354 0.615,0.198 10 false VIJ3 2.885,6.021 3.5,6.219 0.615,0.198 10 false VIJ4 5.896,2.344 6.51,2.542 0.615,0.198 10 false VIJ2 5.885,2.719 6.5,2.917 0.615,0.198 10 false PIJ2 5.885,3.115 6.5,3.313 0.615,0.198 10 false EIJ2 5.885,4.188 6.5,4.385 0.615,0.198 10 false VIJ3 5.875,4.583 6.49,4.781 0.615,0.198 10 false PIJ3 5.875,4.99 6.49,5.188 0.615,0.198 10 false EIJ3 5.885,6.042 6.5,6.24 0.615,0.198 10 false VIJ4 5.875,6.448 6.49,6.646 0.615,0.198 10 false PIJ4 5.875,6.833 6.49,7.031 0.615,0.198 10 false EIJ4 5.469,0.469 6.083,0.667 0.615,0.198 10 false C139 5.469,0.854 6.083,1.052 0.615,0.198 10 false C139 5.469,1.26 6.083,1.458 0.615,0.198 10 false C139 5.563,0.281 6.177,0.479 0.615,0.198 10 false 52 5.563,0.677 6.177,0.875 0.615,0.198 10 false 50 5.563,1.083 6.177,1.281 0.615,0.198 10 false 51 5.469,2.313 6.083,2.51 0.615,0.198 10 false C139 5.469,2.698 6.083,2.896 0.615,0.198 10 false C139 5.469,3.104 6.083,3.302 0.615,0.198 10 false C139 5.479,4.177 6.094,4.375 0.615,0.198 10 false C139 5.469,4.573 6.083,4.771 0.615,0.198 10 false C139 5.469,4.969 6.083,5.167 0.615,0.198 10 false C139 5.469,6.021 6.083,6.219 0.615,0.198 10 false C139 5.469,6.417 6.083,6.615 0.615,0.198 10 false C139 5.479,6.813 6.094,7.01 0.615,0.198 10 false C139 5.469,7.74 6.083,7.938 0.615,0.198 10 false C139 6.167,8.229 6.635,8.51 0.469,0.281 10 false ECM 5.563,2.125 6.177,2.323 0.615,0.198 10 false 42 5.542,7.563 6.156,7.76 0.615,0.198 10 false 23 5.552,2.542 6.167,2.74 0.615,0.198 10 false 40 5.563,2.938 6.177,3.135 0.615,0.198 10 false 41 5.552,4 6.167,4.198 0.615,0.198 10 false 32 5.552,4.406 6.167,4.604 0.615,0.198 10 false 30 5.552,4.802 6.167,5 0.615,0.198 10 false 31 5.552,5.844 6.167,6.042 0.615,0.198 10 false 49 5.552,6.24 6.167,6.438 0.615,0.198 10 false 47 5.542,6.635 6.156,6.833 0.615,0.198 10 false 48 3.26,0.333 3.438,0.552 0.177,0.219 10 false 2 3.26,0.719 3.438,0.938 0.177,0.219 10 false 4 3.26,1.125 3.438,1.344 0.177,0.219 10 false 1 1.792,0.75 1.969,0.969 0.177,0.219 10 false 5 1.813,2.594 1.99,2.813 0.177,0.219 10 false 5 1.802,4.458 1.979,4.677 0.177,0.219 10 false 5 1.802,6.313 1.979,6.531 0.177,0.219 10 false 5 3.26,2.177 3.438,2.396 0.177,0.219 10 false 2 3.26,4.031 3.438,4.25 0.177,0.219 10 false 2 3.26,5.885 3.438,6.104 0.177,0.219 10 false 2 3.26,2.958 3.438,3.177 0.177,0.219 10 false 1 3.25,4.833 3.427,5.052 0.177,0.219 10 false 1 3.26,6.677 3.438,6.896 0.177,0.219 10 false 1 3.26,2.563 3.438,2.781 0.177,0.219 10 false 4 3.26,4.427 3.438,4.646 0.177,0.219 10 false 4 3.26,6.281 3.438,6.5 0.177,0.219 10 false 4 4.74,0.281 4.917,0.5 0.177,0.219 10 false * 4.719,2.125 4.896,2.344 0.177,0.219 10 false * 4.729,3.979 4.906,4.198 0.177,0.219 10 false * 4.698,5.823 4.875,6.042 0.177,0.219 10 false * 0.198,8.375 1.646,8.594 1.448,0.219 10 false *: Shielded

A492045E01
2.521,1.167 3.135,1.365 0.615,0.198 10 false PIJ5 2.521,1.573 3.135,1.771 0.615,0.198 10 false EIJ5 2.521,0.792 3.135,0.99 0.615,0.198 10 false VIJ5 1.646,1.188 2.26,1.385 0.615,0.198 10 false CIJ5 1.615,3.021 2.229,3.219 0.615,0.198 10 false CIJ6 5.521,3.021 6.135,3.219 0.615,0.198 10 false PIJ6 2.521,3.385 3.135,3.583 0.615,0.198 10 false EIJ6 2.521,2.594 3.135,2.792 0.615,0.198 10 false VIJ6 1.438,1.052 1.594,1.25 0.156,0.198 10 false 5 1.458,2.896 1.615,3.094 0.156,0.198 10 false 5 2.896,1.021 3.052,1.219 0.156,0.198 10 false 4 2.896,1.427 3.052,1.625 0.156,0.198 10 false 1 2.896,0.625 3.052,0.823 0.156,0.198 10 false 2 2.906,2.854 3.063,3.052 0.156,0.198 10 false 4 2.906,3.26 3.063,3.458 0.156,0.198 10 false 1 2.906,2.458 3.063,2.656 0.156,0.198 10 false 2 4.323,0.542 4.531,0.698 0.208,0.156 10 false * 4.344,2.354 4.552,2.51 0.208,0.156 10 false * 0.25,4.333 1.479,4.531 1.229,0.198 10 false *: Shielded 1.198,2.063 5.938,2.26 4.74,0.198 10 false Fuel Pressure Sensor (No. 5 Injector Assembly) 1.208,1.917 1.823,2.115 0.615,0.198 10 false C121 1.25,3.688 1.865,3.885 0.615,0.198 10 false C122 1.167,3.833 5.906,4.031 4.74,0.198 10 false Fuel Pressure Sensor (No. 6 Injector Assembly) 5.531,1.177 6.146,1.375 0.615,0.198 10 false PIJ5 5.531,1.573 6.146,1.771 0.615,0.198 10 false EIJ5 5.521,0.781 6.135,0.979 0.615,0.198 10 false VIJ5 5.188,0.948 5.5,1.146 0.313,0.198 10 false 37 5.188,1.344 5.5,1.542 0.313,0.198 10 false 38 5.198,0.542 5.51,0.74 0.313,0.198 10 false 39 5.177,3.198 5.49,3.396 0.313,0.198 10 false 28 5.188,2.792 5.5,2.99 0.313,0.198 10 false 27 5.167,2.385 5.479,2.583 0.313,0.198 10 false 29 5.094,0.75 5.708,0.948 0.615,0.198 10 false C139 5.094,1.135 5.708,1.333 0.615,0.198 10 false C139 5.094,1.542 5.708,1.74 0.615,0.198 10 false C139 5.094,3.385 5.708,3.583 0.615,0.198 10 false C139 5.094,2.594 5.708,2.792 0.615,0.198 10 false C139 5.094,2.99 5.708,3.188 0.615,0.198 10 false C139 2.521,2.99 3.135,3.188 0.615,0.198 10 false PIJ6 5.51,3.417 6.125,3.615 0.615,0.198 10 false EIJ6 5.521,2.625 6.135,2.823 0.615,0.198 10 false VIJ6 5.833,4.031 6.521,4.385 0.688,0.354 10 false ECM

CAUTION / NOTICE / HINT

NOTICE:

After replacing the ECM, the new ECM needs registration (Click here Engine / Hybrid System>F33A-FTV (ENGINE CONTROL)>ECD SYSTEM (w/o DPF)>REGISTRATION) and initialization (Click here Engine / Hybrid System>F33A-FTV (ENGINE CONTROL)>ECD SYSTEM (w/o DPF)>INITIALIZATION).


HINT:

Read freeze frame data using the GTS. Freeze frame data records the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, and other data from the time the malfunction occurred.


PROCEDURE

1.CHECK FOR ANY OTHER DTCS OUTPUT
a.

Enter the following menus: Powertrain / Engine / Trouble Codes.

Powertrain > Engine > Trouble Codes
50001 372

b.

Read the DTCs.

Result:
Result Proceed to
"Fuel pressure sensor circuit DTC" and "Injector Internal EEPROM Malfunction circuit DTC" are output* A
Except above B


HINT:
·

*: Fuel pressure sensor circuit DTC and Injector Internal EEPROM Malfunction circuit DTC:

Fuel pressure sensor circuit DTC: P13A011, P13A015, P13A02A, P13A511, P13A515, P13A52A, P13AA11, P13AA15, P13AA2A, P13B011, P13B015, P13B02A, P13B511, P13B515, P13B52A, P13BA11, P13BA15, P13BA2A, P13E011, P13E015, P13E511, P13E515.

Injector Internal EEPROM Malfunction circuit DTC: P168A00, P168A44, P168A46, P168B00, P168B44, P168B46, P168C00, P168C44, P168C46, P168D00, P168D44, P168D46, P168E00, P168E44, P168E46, P168F00, P168F44, P168F46.

·

When there is an injector internal EEPROM malfunction, fuel pressure sensor (sub CPU) signal stuck in range and fuel temperature sensor circuit open DTCs are output at the same time.

For example, when P168A00, P168A44, P168A46 is output, P13A02A and P13C013 are output together.





A

GO TO INTERNAL EEPROM MALFUNCTION CIRCUIT

B

2.CHECK HARNESS AND CONNECTOR (INJECTOR ASSEMBLY - ECM)
2.CHECK HARNESS AND CONNECTOR (INJECTOR ASSEMBLY - ECM)
a.

Disconnect the injector assembly connector.


b.

Disconnect the ECM connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(C117,C139,C118,C119,C120,C121,C122)Location & Routing

Click Connector(C117)Engine Compartment>Connecting Wire / Cooling Fan Wire / Engine Wire / Fuel Pump Motor Wire / No. 1 Connecting Wire / No. 10 Engine Wire / No. 2 Connecting Wire / No. 3 Connecting Wire / No. 4 Connecting Wire / Sensor Wire / Turbocharger Wire>No. 1 Fuel Injector Assembly

Click Connector(C139)Engine Compartment>Connecting Wire / Cooling Fan Wire / Engine Wire / Fuel Pump Motor Wire / No. 1 Connecting Wire / No. 10 Engine Wire / No. 2 Connecting Wire / No. 3 Connecting Wire / No. 4 Connecting Wire / Sensor Wire / Turbocharger Wire>ECM

Click Connector(C118)Engine Compartment>Connecting Wire / Cooling Fan Wire / Engine Wire / Fuel Pump Motor Wire / No. 1 Connecting Wire / No. 10 Engine Wire / No. 2 Connecting Wire / No. 3 Connecting Wire / No. 4 Connecting Wire / Sensor Wire / Turbocharger Wire>No. 2 Fuel Injector Assembly

Click Connector(C119)Engine Compartment>Connecting Wire / Cooling Fan Wire / Engine Wire / Fuel Pump Motor Wire / No. 1 Connecting Wire / No. 10 Engine Wire / No. 2 Connecting Wire / No. 3 Connecting Wire / No. 4 Connecting Wire / Sensor Wire / Turbocharger Wire>No. 3 Fuel Injector Assembly

Click Connector(C120)Engine Compartment>Connecting Wire / Cooling Fan Wire / Engine Wire / Fuel Pump Motor Wire / No. 1 Connecting Wire / No. 10 Engine Wire / No. 2 Connecting Wire / No. 3 Connecting Wire / No. 4 Connecting Wire / Sensor Wire / Turbocharger Wire>No. 4 Fuel Injector Assembly

Click Connector(C121)Engine Compartment>Connecting Wire / Cooling Fan Wire / Engine Wire / Fuel Pump Motor Wire / No. 1 Connecting Wire / No. 10 Engine Wire / No. 2 Connecting Wire / No. 3 Connecting Wire / No. 4 Connecting Wire / Sensor Wire / Turbocharger Wire>No. 5 Fuel Injector Assembly

Click Connector(C122)Engine Compartment>Connecting Wire / Cooling Fan Wire / Engine Wire / Fuel Pump Motor Wire / No. 1 Connecting Wire / No. 10 Engine Wire / No. 2 Connecting Wire / No. 3 Connecting Wire / No. 4 Connecting Wire / Sensor Wire / Turbocharger Wire>No. 6 Fuel Injector Assembly

C117-2 (VIJ1) - C139-52 (VIJ1) Always Below 1 Ω
C117-4 (PIJ1) - C139-50 (PIJ1) Always Below 1 Ω
C117-1 (EIJ1) - C139-51 (EIJ1) Always Below 1 Ω
C118-2 (VIJ2) - C139-42 (VIJ2) Always Below 1 Ω
C118-4 (PIJ2) - C139-40 (PIJ2) Always Below 1 Ω
C118-1 (EIJ2) - C139-41 (EIJ2) Always Below 1 Ω
C119-2 (VIJ3) - C139-32 (VIJ3) Always Below 1 Ω
C119-4 (PIJ3) - C139-30 (PIJ3) Always Below 1 Ω
C119-1 (EIJ3) - C139-31 (EIJ3) Always Below 1 Ω
C120-2 (VIJ4) - C139-49 (VIJ4) Always Below 1 Ω
C120-4 (PIJ4) - C139-47 (PIJ4) Always Below 1 Ω
C120-1 (EIJ4) - C139-48 (EIJ4) Always Below 1 Ω
C121-2 (VIJ5) - C139-39 (VIJ5) Always Below 1 Ω
C121-4 (PIJ5) - C139-37 (PIJ5) Always Below 1 Ω
C121-1 (EIJ5) - C139-38 (EIJ5) Always Below 1 Ω
C122-2 (VIJ6) - C139-29 (VIJ6) Always Below 1 Ω
C122-4 (PIJ6) - C139-27 (PIJ6) Always Below 1 Ω
C122-1 (EIJ6) - C139-28 (EIJ6) Always Below 1 Ω
C117-2 (VIJ1) or C139-52 (VIJ1) - Body ground and other terminals Always 10 kΩ or higher
C117-4 (PIJ1) or C139-50 (PIJ1) - Body ground and other terminals Always 10 kΩ or higher
C118-2 (VIJ2) or C139-42 (VIJ2)) - Body ground and other terminals Always 10 kΩ or higher
C118-4 (PIJ2) or C139-40 (PIJ2) - Body ground and other terminals Always 10 kΩ or higher
C119-2 (VIJ3) or C139-32 (VIJ3) - Body ground and other terminals Always 10 kΩ or higher
C119-4 (PIJ3) or C139-30 (PIJ3) - Body ground and other terminals Always 10 kΩ or higher
C120-2 (VIJ4) or C139-49 (VIJ4) - Body ground and other terminals Always 10 kΩ or higher
C120-4 (PIJ4) or C139-47 (PIJ4) - Body ground and other terminals Always 10 kΩ or higher
C121-2 (VIJ5) or C139-39 (VIJ5) - Body ground and other terminals Always 10 kΩ or higher
C121-4 (PIJ5) or C139-37 (PIJ5) - Body ground and other terminals Always 10 kΩ or higher
C122-2 (VIJ6) or C139-29 (VIJ6) - Body ground and other terminals Always 10 kΩ or higher
C122-4 (PIJ6) or C139-27 (PIJ6) - Body ground and other terminals Always 10 kΩ or higher



d.

Reconnect the injector assembly connector.


e.

Reconnect the ECM connector.


Result:
Proceed to
OK
NG



OK

3.CHECK ECM (FUEL PRESSURE SENSOR VOLTAGE)

NG

7.REPAIR OR REPLACE HARNESS OR CONNECTOR
3.CHECK ECM (FUEL PRESSURE SENSOR VOLTAGE)
a.

Disconnect the injector assembly connector.


b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Switch Condition Specified Condition

Click Location & Routing(C117,C118,C119,C120,C121,C122)Location & Routing

Click Connector(C117)Engine Compartment>Connecting Wire / Cooling Fan Wire / Engine Wire / Fuel Pump Motor Wire / No. 1 Connecting Wire / No. 10 Engine Wire / No. 2 Connecting Wire / No. 3 Connecting Wire / No. 4 Connecting Wire / Sensor Wire / Turbocharger Wire>No. 1 Fuel Injector Assembly

Click Connector(C118)Engine Compartment>Connecting Wire / Cooling Fan Wire / Engine Wire / Fuel Pump Motor Wire / No. 1 Connecting Wire / No. 10 Engine Wire / No. 2 Connecting Wire / No. 3 Connecting Wire / No. 4 Connecting Wire / Sensor Wire / Turbocharger Wire>No. 2 Fuel Injector Assembly

Click Connector(C119)Engine Compartment>Connecting Wire / Cooling Fan Wire / Engine Wire / Fuel Pump Motor Wire / No. 1 Connecting Wire / No. 10 Engine Wire / No. 2 Connecting Wire / No. 3 Connecting Wire / No. 4 Connecting Wire / Sensor Wire / Turbocharger Wire>No. 3 Fuel Injector Assembly

Click Connector(C120)Engine Compartment>Connecting Wire / Cooling Fan Wire / Engine Wire / Fuel Pump Motor Wire / No. 1 Connecting Wire / No. 10 Engine Wire / No. 2 Connecting Wire / No. 3 Connecting Wire / No. 4 Connecting Wire / Sensor Wire / Turbocharger Wire>No. 4 Fuel Injector Assembly

Click Connector(C121)Engine Compartment>Connecting Wire / Cooling Fan Wire / Engine Wire / Fuel Pump Motor Wire / No. 1 Connecting Wire / No. 10 Engine Wire / No. 2 Connecting Wire / No. 3 Connecting Wire / No. 4 Connecting Wire / Sensor Wire / Turbocharger Wire>No. 5 Fuel Injector Assembly

Click Connector(C122)Engine Compartment>Connecting Wire / Cooling Fan Wire / Engine Wire / Fuel Pump Motor Wire / No. 1 Connecting Wire / No. 10 Engine Wire / No. 2 Connecting Wire / No. 3 Connecting Wire / No. 4 Connecting Wire / Sensor Wire / Turbocharger Wire>No. 6 Fuel Injector Assembly

C117-2 (VIJ1) - C117-1 (EIJ1) Ignition switch ON 4.5 to 5.5 V
C118-2 (VIJ2) - C118-1 (EIJ2) Ignition switch ON 4.5 to 5.5 V
C119-2 (VIJ3) - C119-1 (EIJ3) Ignition switch ON 4.5 to 5.5 V
C120-2 (VIJ4) - C120-1 (EIJ4) Ignition switch ON 4.5 to 5.5 V
C121-2 (VIJ5) - C121-1 (EIJ5) Ignition switch ON 4.5 to 5.5 V
C122-2 (VIJ6) - C122-1 (EIJ6) Ignition switch ON 4.5 to 5.5 V



Result:
Proceed to
OK
NG



OK

4.REPLACE INJECTOR ASSEMBLY (RELEVANT CYLINDER)

NG

6.REPLACE ECM
4.REPLACE INJECTOR ASSEMBLY (RELEVANT CYLINDER)
a.

Replace the injector assembly of the cylinder relevant to the DTC.

Click hereEngine / Hybrid System>F33A-FTV (FUEL)>FUEL INJECTOR>REMOVAL

NOTICE:
·

Replace the injection pipe sub-assembly that was removed with a new one.

·

Following the repair manual, temporarily install the injection pipe and after positioning the injector, tighten the injector to the specified torque.

·

If the installation procedure is not performed correctly, injector assemblies may become out of position, which may cause the injector assemblies to deteriorate, resulting in malfunctions.

·

If an injector assembly deteriorates and malfunctions, other problems such as knocking, rough idle, etc. may occur.

·

If an injector assembly becomes out of position, it is possible that the seal between the injector assembly and injection pipe sub-assembly may become incomplete, resulting in a fuel leak.




Result:
Proceed to
NEXT



NEXT

5.BLEED AIR FROM FUEL SYSTEM
5.BLEED AIR FROM FUEL SYSTEM
a.

Bleed the air from the fuel system.

Click hereEngine / Hybrid System>F33A-FTV (FUEL)>FUEL SYSTEM>ON-VEHICLE INSPECTION


Result:
Proceed to
NEXT



NEXT

8.CONFIRM WHETHER MALFUNCTION HAS BEEN SUCCESSFULLY REPAIRED
6.REPLACE ECM

Result:
Proceed to
NEXT



NEXT

8.CONFIRM WHETHER MALFUNCTION HAS BEEN SUCCESSFULLY REPAIRED
7.REPAIR OR REPLACE HARNESS OR CONNECTOR
a.

Repair or replace the harness or connector.


Result:
Proceed to
NEXT



NEXT

8.CONFIRM WHETHER MALFUNCTION HAS BEEN SUCCESSFULLY REPAIRED
8.CONFIRM WHETHER MALFUNCTION HAS BEEN SUCCESSFULLY REPAIRED
a.

Clear the DTCs.

Powertrain > Engine > Clear DTCs
50002 372
HINT:

Perform the following when there are DTCs which are not cleared.

1.

Turn the ignition switch off and wait for 30 seconds or more.

2.

Turn the ignition switch to ON and wait for 8 seconds or more.

3.

Enter the following menus: Powertrain / Engine / Trouble Codes / Clear.

4.

Check that all DTCs have been cleared.




b.

Turn the ignition switch off and wait for 30 seconds or more.


c.

Turn the ignition switch to ON and wait for 8 seconds or more.


d.

Start the engine.


e.

After idling for 60 seconds, increase the engine speed from idling to 2500 rpm repeatedly for 30 seconds.


f.

Enter the following menus: Powertrain / Engine / Trouble Codes.

Powertrain > Engine > Trouble Codes
50001 372

g.

Confirm that the DTC is not output again.


Result:
Proceed to
NEXT



NEXT

END