1. PRECAUTION
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
51442 3.REMOVE NO. 2 ENGINE UNDER COVER
4.DRAIN ENGINE COOLANT
16711 5.REMOVE FAN SHROUD
27020 6.REMOVE GENERATOR ASSEMBLY
13523P 7.REMOVE CAMSHAFT TIMING PULLEY
11385 8.REMOVE CAMSHAFT OIL SEAL RETAINER
11305A 9.REMOVE OIL SEAL
16100 10.REMOVE ENGINE WATER PUMP ASSEMBLY
Remove the 2 bolts and fan belt adjusting bar.
Remove the 5 bolts, 2 nuts, vacuum hose connector, engine water pump assembly and gasket.