Home › Engine / Hybrid System › 1GR-FE (ENGINE MECHANICAL) › REAR CRANKSHAFT OIL SEAL
RM25T0E _51 Engine / Hybrid System _029891 1GR-FE ENGINE MECHANICAL _0136558 REAR CRANKSHAFT OIL SEAL A

1GR-FE ENGINE MECHANICAL  REAR CRANKSHAFT OIL SEAL  INSTALLATION  


PROCEDURE

Hide 11381A 1.INSTALL ENGINE REAR OIL SEAL

a.

Apply MP grease to the lip of a new engine rear oil seal.


b.
A326592C01
1.125,2.031 1.26,2.031 1.26,2.031 1.26,1.24 true 0.833,1.948 1.219,2.156 0.385,0.208 10 false SST 2.229,1.188 2.615,1.396 0.385,0.208 10 false *a
*a -0.5 (-0.0197 in.) to 0.5 mm (0.0197 in.)


Using SST and a hammer, tap in the engine rear oil seal until its surface is flush with the rear oil seal retainer edge.

SST
09223-78010  

Standard:

-0.5 (-0.0197 in.) to 0.5 mm (0.0197 in.) (from the rear oil seal retainer edge)


NOTICE:
·

Keep the lip of the engine rear oil seal free from foreign matter.

·

Do not tap in the engine rear oil seal at an angle.




Hide 31250 3.INSTALL CLUTCH DISC ASSEMBLY