Home › Drivetrain › CLUTCH › CLUTCH PEDAL (for RHD) › 2014.08–2016.08
RM25T0E _52 Drivetrain _029901 CLUTCH _0136565 CLUTCH PEDAL(for RHD) A

CLUTCH  CLUTCH PEDAL(for RHD)  REMOVAL  


PROCEDURE

Hide 1.DRAIN CLUTCH FLUID

Hide 31410 2.REMOVE CLUTCH MASTER CYLINDER ASSEMBLY

Hide 55480D 3.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY

Hide 55844 4.REMOVE NO. 2 HEATER TO REGISTER DUCT

Hide 5.REMOVE CLUTCH PEDAL SUPPORT ASSEMBLY

a.

for 1VD-FTV:

Disconnect the clutch switch connector.


b.
C212396

Remove the bolt and clutch pedal support assembly.


Hide 31301R 6.REMOVE TURN OVER SPRING SEAT COMPRESSION SPRING

a.
C210593

Move the pedal to the full stroke position.


b.

Remove the turn over spring seat compression spring.


Hide 31301A 7.REMOVE CLUTCH PEDAL SPRING (for 1GR-FE, 1VD-FTV)

a.
C210594

Remove the 2 E-rings and clutch pedal spring with spacer.


b.

Remove the spacer from the clutch pedal spring.


Hide 31301 8.REMOVE CLUTCH PEDAL SUB-ASSEMBLY

a.
C210595

Remove the nut and bolt.


b.

Remove the clutch pedal sub-assembly from the clutch pedal support sub-assembly.


Hide 31321 9.REMOVE CLUTCH PEDAL PAD

Hide 31324A 10.REMOVE CLUTCH PEDAL SHAFT COLLAR

a.
C210596

Remove the clutch pedal shaft collar from the clutch pedal sub-assembly.


Hide 31301C 11.REMOVE CLUTCH PEDAL BUSH

a.
C210597

Remove the 2 clutch pedal bushes from the clutch pedal sub-assembly.


Hide 31301B 12.REMOVE NO. 1 CLUTCH PEDAL CUSHION

a.
C210598

Remove the No. 1 clutch pedal cushion from the clutch pedal sub-assembly.


Hide 31301P 13.REMOVE CLUTCH PEDAL TURNOVER BUSH

a.
C210599

Remove the clutch pedal turnover bush from the clutch pedal sub-assembly.


Hide 31453B 14.REMOVE CLUTCH MASTER CYLINDER PUSH ROD CLEVIS BUSH

a.
C210600

Remove the clutch master cylinder push rod clevis bush from the clutch pedal sub-assembly.


Hide 31353 15.REMOVE CLUTCH PEDAL SPRING HOLDER

a.
C210601

Remove the clutch pedal spring holder from the clutch pedal support sub-assembly.


Hide 88280A 16.REMOVE CLUTCH SWITCH ASSEMBLY (for 1VD-FTV)

a.
C210602

Loosen the lock nut and remove the clutch switch assembly.


b.

Remove the lock nut from the clutch switch assembly.


Hide 31301F 17.REMOVE CLUTCH PEDAL STOPPER BOLT (for 1GR-FE, 1HZ)

a.
C210605

Loosen the lock nut and remove the clutch pedal stopper bolt.


b.

Remove the lock nut from the clutch pedal stopper bolt.