Home › Drivetrain › CLUTCH › CLUTCH UNIT (for 1GR-FE)
RM25T0E _52 Drivetrain _029901 CLUTCH _0136573 CLUTCH UNIT(for 1GR-FE) A

CLUTCH  CLUTCH UNIT(for 1GR-FE)  REMOVAL  


PROCEDURE

Hide 31204 2.REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY

a.
C311968

Remove the clutch release fork sub-assembly with the clutch release bearing assembly from manual transmission assembly.


b.
C163036

Remove the clutch release bearing assembly and release bearing hub clip from the clutch release fork sub-assembly.


Hide 31237 3.REMOVE CLUTCH RELEASE FORK SUPPORT BOOT

a.
C307517

Remove the clutch release fork support boot from the clutch release fork sub-assembly.


Hide 31236B 4.REMOVE RELEASE FORK SUPPORT

a.
C310625

Remove the release fork support from the manual transmission assembly.


Hide 31210 5.REMOVE CLUTCH COVER ASSEMBLY

a.
C173303C02
1.542,1.302 1.01,0.938 1.01,0.938 1.469,1.323 true 0.833,0.854 1.563,1.031 0.729,0.177 10 false *a
*a Matchmark


Put matchmarks on the clutch cover and flywheel.


b.

Loosen each set bolt one turn at a time until spring tension is released.


c.

Remove the 6 set bolts and pull off the clutch cover assembly.

NOTICE:

Do not drop the clutch disc.



Hide 31250 6.REMOVE CLUTCH DISC ASSEMBLY

NOTICE:

Keep the lining part of the clutch disc, pressure plate and surface of the flywheel away from oil and foreign matter.


Hide 33311W 7.INSPECT INPUT SHAFT BEARING