Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY(for Bench Seat Type)
RM25T0E _58 Vehicle Interior _029930 SEAT _0136805 FRONT SEAT ASSEMBLY(for Bench Seat Type) A

SEAT  FRONT SEAT ASSEMBLY(for Bench Seat Type)  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


NOTICE:

If the seat is set down in another location after removing it from the vehicle, the seat may tilt and damage the front inner seat track assembly RH or front outer seat track assembly RH due to the difference in shape between the left and right seat tracks.


HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 1.INSTALL FRONT SEAT ASSEMBLY

a.

Place the front seat assembly in the cabin.

NOTICE:
·

Before placing the seat in the vehicle, operate the seat track adjusting handle to slide the seat track to the center position.

·

Be careful not to damage the vehicle body.




b.

Temporarily install the front seat assembly with the 4 bolts.


c.

Operate the seat track adjusting handle to move the seat to the rearmost position.


d.

Tighten the 2 bolts.

Torque:
40 N*m (408 kgf*cm, 30 ft.*lbf)


e.

Operate the seat track adjusting handle to move the seat to the foremost position.


f.

Tighten the 2 bolts.

Torque:
40 N*m (408 kgf*cm, 30 ft.*lbf)


g.

During sliding operation of the front seat, check that the left and right adjusters move together smoothly and lock simultaneously. If the seat adjusters do not lock simultaneously, loosen the seat mounting bolts to adjust the adjuster position.


Hide 72137B 2.INSTALL SEAT TRACK COVER RH (w/ Seat Track Cover)

a.

Operate the seat track adjusting handle to move the seat to the foremost position.


b.

Attach the 2 guides to install the seat track bracket cover RH.


c.

Install the clip.


Hide 72157A 3.INSTALL INNER SEAT TRACK BRACKET COVER RH (w/ Seat Track Cover)

HINT:

Use the same procedure described for the seat track bracket cover RH.


Hide 73230 4.INSTALL FRONT SEAT INNER BELT ASSEMBLY RH

Hide 73150 5.INSTALL FRONT CENTER SEAT LAP TYPE BELT ASSEMBLY

Hide 71910A 6.INSTALL FRONT SEAT HEADREST ASSEMBLY

a.

Install the front seat headrest assembly.