1. LOCK FRONT DIFFERENTIAL
Turn the ignition switch to ON.
Shift the transfer shift lever to the H4 or L4 position.
Turn the differential lock control switch to the FR.RR position, and lock the front differential.
Rotate the wheels to check they are in the differential lock condition.
Disconnect the cable from the negative (-) terminal of the battery.
2.DRAIN DIFFERENTIAL OIL
37140 3.REMOVE FRONT PROPELLER SHAFT ASSEMBLY
4.REMOVE FRONT BRAKE TUBE (w/o ABS)
for 1HZ:
Using a union nut wrench, disconnect the brake line while holding the front flexible hose with a wrench.
Remove the clip.
Remove the 4 bolts and 3-way joint with the brake hose and tube.
for 1GR-FE:
Using a union nut wrench, disconnect the brake line while holding the front flexible hose with a wrench.
Remove the clip.
Remove the 4 bolts and 3-way joint with the brake hose and tube.
5.REMOVE FRONT BRAKE TUBE (w/ ABS)
for 1HZ, 1VD-FTV:
Using a union nut wrench, disconnect the brake line while holding the front flexible hose with a wrench.
Remove the 2 clips.
Remove the 5 bolts and hose bracket joint with the brake hose and tube.
for 1GR-FE:
Using a union nut wrench, disconnect the brake line while holding the front flexible hose with a wrench.
Remove the 3 bolts and brake tube.
6.REMOVE FRONT AXLE SHAFT ASSEMBLY
7.DISCONNECT WIRE HARNESS
41110F 8.REMOVE FRONT DIFFERENTIAL CARRIER ASSEMBLY
Remove the 10 nuts, 10 washers and front differential carrier assembly.
Be careful not to damage the contact surfaces of the front differential carrier assembly and front axle housing.
Remove the gasket.