1.LOCK REAR DIFFERENTIAL
Turn the ignition switch to ON.
Shift the transfer shift lever to the H4 or L4 position.
Turn the differential lock control switch to the RR position and lock the rear differential.
Rotate the rear wheels to check they are in the differential lock condition.
Disconnect the cable from the negative (-) terminal of the battery.
37110 2.REMOVE PROPELLER SHAFT ASSEMBLY
3.DRAIN DIFFERENTIAL OIL
4.REMOVE REAR AXLE SHAFT ASSEMBLY
41467 5.REMOVE DIFFERENTIAL LOCK CYLINDER PROTECTOR
Remove the 2 bolts, 2 nuts and differential lock cylinder protector.
6.DISCONNECT WIRE HARNESS
Disconnect the connector clamp, 2 connectors and breather hose.
Remove the nut and wire harness.
7.REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY
Remove the 10 nuts, 10 washers and rear differential carrier assembly.
Be careful not to damage the contact surfaces of the rear differential carrier and rear axle housing.
Remove the gasket.