41110 1.INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY
Clean the contact surfaces of the rear differential carrier sub-assembly and axle housing.
Be careful not to damage the installation surface.
Install the rear differential carrier sub-assembly, and a new gasket and the 10 washers with the 10 nuts.
Be careful to install the gasket without tearing it.
2.CONNECT WIRE HARNESS
Connect the wire harness with the nut.
Connect the connector clamp, 2 connectors and breather hose.
41467 3.INSTALL DIFFERENTIAL LOCK CYLINDER PROTECTOR
Install the differential lock cylinder protector with the 2 bolts and 2 nuts.
4.INSTALL REAR AXLE SHAFT ASSEMBLY
5.ADD DIFFERENTIAL OIL
37110 6.INSTALL PROPELLER SHAFT ASSEMBLY