Home › Drivetrain › AXLE AND DIFFERENTIAL › REAR DIFFERENTIAL CARRIER ASSEMBLY(for LSD)
RM25T0E _52 Drivetrain _029907 AXLE AND DIFFERENTIAL _0137253 REAR DIFFERENTIAL CARRIER ASSEMBLY(for LSD) A

AXLE AND DIFFERENTIAL  REAR DIFFERENTIAL CARRIER ASSEMBLY(for LSD)  REMOVAL  


PROCEDURE

Hide 37110 1.REMOVE PROPELLER SHAFT ASSEMBLY

Hide 3.REMOVE REAR AXLE SHAFT ASSEMBLY

Hide 4.REMOVE WIRE HARNESS CLAMP BRACKET (w/ ABS)

a.
C311230

Disconnect the clamp.


b.

Remove the nut and wire harness clamp bracket.


Hide 41101 5.REMOVE REAR DIFFERENTIAL CARRIER SUB-ASSEMBLY

a.
C161833

Remove the 10 nuts, 10 washers and rear differential carrier sub-assembly.

NOTICE:

Be careful not to damage the contact surfaces of the rear differential carrier sub-assembly and rear axle housing.



b.

Remove the gasket.