Home › Drivetrain › CLUTCH › CLUTCH PEDAL SWITCH (for 1VD-FTV) › from 2016.08
RM25T0E _52 Drivetrain _029901 CLUTCH _0136575 CLUTCH PEDAL SWITCH(for 1VD-FTV) A

CLUTCH  CLUTCH PEDAL SWITCH(for 1VD-FTV)  INSTALLATION  


PROCEDURE

Hide 88280A 1.INSTALL CLUTCH SWITCH ASSEMBLY

a.

Insert the clutch switch assembly until the rod hits the cushion.

NOTICE:

When inserting the clutch switch assembly, support the pedal from behind so that the pedal is not pushed in.


HINT:

Tighten the lock nut to the specified torque when adjusting the clutch pedal.



b.

Connect the clutch switch connector.


Hide 31301 2.INSPECT AND ADJUST CLUTCH PEDAL SUB-ASSEMBLY

Hide 73900 3.INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Knee Airbag)

Hide 55480D 4.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY (w/o Knee Airbag)