1.SECURE STEERING WHEEL
Secure the steering wheel assembly with the seat belt in order to prevent rotation.
This operation is useful to prevent damage to the spiral cable.
2.REMOVE FRONT WHEEL
17881 3.REMOVE NO. 1 AIR CLEANER HOSE
17705 4.REMOVE AIR CLEANER CAP SUB-ASSEMBLY
5.REMOVE AIR CLEANER CASE SUB-ASSEMBLY
53736 6.REMOVE FRONT FENDER APRON SEAL RH
Detach the 4 clips and fold back the front fender apron seal RH.
45636B 7.REMOVE INTERMEDIATE LINK JOINT PROTECTOR
Remove the bolt and slide the intermediate link joint protector.
45203 8.DISCONNECT NO. 2 STEERING INTERMEDIATE SHAFT SUB-ASSEMBLY
Loosen the 2 bolts of the steering sliding yoke.
| *a | Matchmark |
Remove the bolt.
Put matchmarks on the No. 2 steering intermediate shaft sub-assembly and power steering gear assembly.
Disconnect the No. 2 steering intermediate shaft sub-assembly from the power steering gear assembly.
45450 9.DISCONNECT STEERING RELAY ROD ASSEMBLY
Remove the cotter pin and castle nut.
Using SST, disconnect the steering relay rod assembly.
10.DRAIN POWER STEERING FLUID
44110 11.REMOVE POWER STEERING GEAR ASSEMBLY
Using a union nut wrench, disconnect the steering gear outlet return tube and pressure feed tube assembly.
Remove the 4 nuts, 4 bolts and power steering gear assembly.