Home › Drivetrain › AXLE AND DIFFERENTIAL › FRONT DIFFERENTIAL CARRIER ASSEMBLY (for Standard) › 2016.08–2019.09
RM25T0E _52 Drivetrain _029907 AXLE AND DIFFERENTIAL _0136706 FRONT DIFFERENTIAL CARRIER ASSEMBLY(for Standard) A

AXLE AND DIFFERENTIAL  FRONT DIFFERENTIAL CARRIER ASSEMBLY(for Standard)  REMOVAL  


PROCEDURE

Hide 37140 2.REMOVE FRONT PROPELLER SHAFT ASSEMBLY

Hide 3.REMOVE FRONT BRAKE TUBE (w/o ABS)

a.

for 1HZ:

C272658

i.

Using a union nut wrench, disconnect the brake line while holding the front flexible hose with a wrench.


ii.

Remove the clip.


iii.

Remove the 4 bolts and 3-way joint with the brake hose and tube.



b.

for 1GR-FE:

C272659

i.

Using a union nut wrench, disconnect the brake line while holding the front flexible hose with a wrench.


ii.

Remove the clip.


iii.

Remove the 4 bolts and 3-way joint with the brake hose and tube.



Hide 4.REMOVE FRONT BRAKE TUBE (w/ ABS,VSC)

a.

for 1HZ, 1VD-FTV:

C272656

i.

Using a union nut wrench, disconnect the brake line while holding the front flexible hose with a wrench.


ii.

Remove the 2 clips.


iii.

Remove the 5 bolts and hose bracket joint with the brake hose and tube.



b.

for 1GR-FE:

C272657

i.

Using a union nut wrench, disconnect the brake line while holding the front flexible hose with a wrench.


ii.

Remove the 3 bolts and brake tube.



Hide 5.REMOVE FRONT AXLE SHAFT ASSEMBLY

Hide 41110F 6.REMOVE FRONT DIFFERENTIAL CARRIER ASSEMBLY

a.
C311238

Remove the 10 nuts, 10 washers and front differential carrier assembly.

NOTICE:

Be careful not to damage the contact surfaces of the front differential carrier and front axle housing.


HINT:
C400713C01
0.521,0.594 0.833,0.75 0.313,0.156 10 false *A 1.688,0.594 2,0.75 0.313,0.156 10 false *B
*A Nut Type A
*B Nut Type B


As there are 2 types of nuts, the same type nut must be used during removal and installation.



b.

Remove the gasket.