1.DRAIN FUEL
Remove the fuel tank drain plug and gasket, and then drain the fuel.
Install a new gasket and the fuel tank drain plug.
2.REMOVE EXHAUST PIPE (w/o DPF)
for 5 Door:
Click hereEngine / Hybrid System>1VD-FTV (INTAKE / EXHAUST)>EXHAUST PIPE (for 5 Door)>REMOVAL
except 5 Door:
Click hereEngine / Hybrid System>1VD-FTV (INTAKE / EXHAUST)>EXHAUST PIPE (except 5 Door)>REMOVAL
37110 3.REMOVE PROPELLER SHAFT ASSEMBLY (w/o DPF)
4.REMOVE MANUAL TRANSMISSION WITH TRANSFER (w/ DPF)
5.REMOVE FUEL TUBE PROTECTOR
Remove the 4 bolts and fuel tube protector.
77296B 6.REMOVE NO. 1 FUEL TUBE PROTECTOR SUPPORT (w/ DPF)
Detach the 4 claws and remove the No. 1 fuel tube protector support.
77206C 7.DISCONNECT NO. 2 FUEL MAIN TUBE SUB-ASSEMBLY
for Single Tank Type, w/o DPF:
Remove the 3 bolts.
Slide the hose clips and disconnect the fuel hoses from the No. 2 fuel main tube sub-assembly.
Disconnect the No. 2 fuel main tube sub-assembly from the fuel tube clamps.
| *a | Bolt | *b | Hose Clip |
| *c | Fuel Tube Clamp | - | - |
for Double Tank Type, w/o DPF:
Remove the 3 bolts.
Slide the hose clips and disconnect the fuel hoses from the No. 2 fuel main tube sub-assembly.
Disconnect the No. 2 fuel main tube sub-assembly from the fuel tube clamps.
| *a | Bolt | *b | Hose Clip |
| *c | Fuel Tube Clamp | - | - |
w/ DPF:
Remove the 3 bolts.
Slide the hose clips and disconnect the fuel hoses from the No. 2 fuel main tube sub-assembly.
Disconnect the No. 2 fuel main tube sub-assembly from the fuel tube clamps.
| *a | Bolt | *b | Hose Clip |
| *c | Fuel Tube Clamp | - | - |
77207B 8.REMOVE NO. 3 FUEL MAIN TUBE SUB-ASSEMBLY
| *a | Hose Clip |
| *b | Bolt |
for Single Tank Type, w/o DPF:
Slide the hose clips and disconnect the fuel hoses from the No. 3 fuel main tube sub-assembly.
Remove the 2 bolts and No. 3 fuel main tube sub-assembly.
| *a | Hose Clip |
| *b | Bolt |
for Double Tank Type, w/o DPF:
Slide the hose clips and disconnect the fuel hoses from the No. 3 fuel main tube sub-assembly.
Remove the 2 bolts and No. 3 fuel main tube sub-assembly.
w/ DPF:
Slide the hose clips and disconnect the fuel hoses from the No. 3 fuel main tube sub-assembly.
Remove the 2 bolts and No. 3 fuel main tube sub-assembly.
| *a | Hose Clip | *b | Bolt |
9.DISCONNECT FUEL MAIN HOSE
w/o DPF:
Slide the hose clip and disconnect the fuel main hose from the fuel suction tube assembly.
w/ DPF:
Slide the hose clip and disconnect the fuel main hose from the fuel suction tube assembly.
10.DISCONNECT FUEL RETURN HOSE
w/o DPF:
Slide the hose clip and disconnect the fuel return hose from the fuel suction tube assembly.
w/ DPF:
Slide the hose clip and disconnect the fuel return hose from the fuel suction tube assembly.
77213 11.DISCONNECT INLET FUEL HOSE
w/o DPF:
Loosen the clamp and disconnect the inlet fuel hose from the fuel tank assembly.
w/ DPF:
Loosen the clamp and disconnect the inlet fuel hose from the fuel tank assembly.
77100D 12.DISCONNECT FUEL BREATHER HOSE
w/o DPF:
Slide the hose clip and disconnect the fuel breather hose from the fuel tank assembly.
w/ DPF:
Slide the hose clip and disconnect the fuel breather hose from the fuel tank assembly.
77100 13.REMOVE FUEL TANK ASSEMBLY
Disconnect the fuel sender gauge connector.
Set an engine lifter underneath the fuel tank assembly.
Remove the 2 bolts and disconnect the 2 fuel tank bands.
Slightly lower the engine lifter.
Remove the fuel tank protector from the fuel tank assembly.
14.REMOVE FUEL SUCTION TUBE ASSEMBLY
w/o DPF:
Remove the 5 screws and fuel suction tube assembly from the fuel tank assembly.
Remove the gasket from the fuel suction tube assembly.
w/ DPF:
| *a | Screw |
| *b | Nut |
Remove the 5 screws and 2 nuts.
Detach the clamp and remove the fuel suction tube assembly from the fuel tank assembly.
Remove the gasket from the fuel suction tube assembly.
77026A 15.REMOVE NO. 1 FUEL EVAPORATION TUBE SUB-ASSEMBLY
w/o DPF:
| *a | Screw |
| *b | Nut |
Detach the clamp.
Remove the 8 screws, 2 nuts and No. 1 fuel evaporation tube sub-assembly from the fuel tank assembly.
Remove the 2 gaskets from the No. 1 evaporation tube sub-assembly.
w/ DPF:
Detach the clamp.
Remove the 8 screws and No. 1 fuel evaporation tube sub-assembly from the fuel tank assembly.
Remove the 2 gaskets from the No. 1 evaporation tube sub-assembly.
77380 16.REMOVE FUEL CUT OFF VALVE ASSEMBLY
Remove the fuel cut off cut off valve assembly from the fuel tank assembly.
77420 17.REMOVE NO. 2 FUEL CUT OFF VALVE ASSEMBLY
Remove the No. 2 fuel cut off valve assembly from the fuel tank assembly.
18.REMOVE FUEL SENDER GAUGE ASSEMBLY
77011 19.REMOVE LOWER FUEL TANK FILLER PIPE SUB-ASSEMBLY
Remove the 6 screws and lower fuel tank filler pipe sub-assembly.
Remove the gasket from the lower fuel tank filler pipe sub-assembly.