Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1.DISCONNECT REAR COMBINATION LIGHT ASSEMBLY LH
Remove the 3 screws and disconnect the rear combination light assembly LH.
81561A 2.REMOVE REAR COMBINATION LIGHT LENS LH (for Rear Bumper Side)
3.REMOVE REAR COMBINATION LIGHT BULB
for Rear Body Side:
| *a | Base Point |
| *b | Unlock Position Mark |
|
Counterclockwise |
Turn the bulb socket counterclockwise until the base point is aligned with the unlock position mark to disconnect the bulb socket from the rear combination light lens LH.
|
Push |
|
Counterclockwise |
Push the rear combination light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the bulb socket.
for Rear Bumper Side:
|
Push |
|
Counterclockwise |
Push the rear combination light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the rear combination light body LH.
4.INSTALL REAR COMBINATION LIGHT BULB
for Rear Body Side:
| *a | Upper Protrusion |
| *b | Lower Protrusion |
|
Long Cutout |
|
Short Cutout |
Align the upper protrusion of the rear combination light bulb with the short cutout of the bulb socket and the lower protrusion with the long cutout, and then insert the bulb to the bulb socket.
|
Push |
|
Clockwise |
While pushing the rear combination light bulb, turn the bulb clockwise to install the bulb.
| *a | Base Point |
| *b | Unlock Position Mark |
Align the base point of the bulb socket to the unlock position mark.
Rotate the bulb socket clockwise until the lock to connect it to the rear combination light lens LH.
for Rear Bumper Side:
| *a | Upper Protrusion |
| *b | Lower Protrusion |
|
Long Cutout |
|
Short Cutout |
Align the upper protrusion of the rear combination light bulb with the short cutout of the rear combination light body LH and the lower protrusion with the long cutout, and then insert the bulb to the rear combination light body LH.
|
Push |
|
Clockwise |
While pushing the rear combination light bulb, turn the bulb clockwise to install the bulb.
5.CONNECT REAR COMBINATION LIGHT ASSEMBLY LH
Connect the rear combination light assembly LH with the 3 screws.
81561A 6.INSTALL REAR COMBINATION LIGHT LENS LH (for Rear Bumper Side)