1. PRECAUTION
After turning the ignition switch off, watching time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
3.REMOVE ENGINE COOLANT
17940D 4.REMOVE INTERCOOLER ASSEMBLY
5.REMOVE COMMON RAIL ASSEMBLY
6.REMOVE EGR VALVE WITH EGR COOLER (w/ EGR System)
23243C 7.REMOVE FUEL PUMP MOTOR WIRE
23805B 8.REMOVE NO. 5 FUEL PIPE SUB-ASSEMBLY
23274D 9.REMOVE NO. 3 FUEL HOSE
Slide the clamp and remove the No. 3 fuel hose from the fuel cooler.
16283 10.REMOVE NO. 6 WATER BY-PASS HOSE
Slide the 2 clamps and remove the No. 6 water by-pass hose from the No. 1 water by-pass pipe and fuel cooler.
23764A 11.REMOVE NO. 4 NOZZLE LEAKAGE PIPE
Slide the clamp and disconnect the No. 2 fuel hose from the fuel cooler.
Remove the union bolt and gasket.
Remove the bolt and No. 4 nozzle leakage pipe.
23763 12.REMOVE NO. 3 NOZZLE LEAKAGE PIPE
Slide the clamp and disconnect the No. 1 fuel hose from the fuel cooler.
Remove the union bolt and gasket.
Remove the bolt and No. 3 nozzle leakage pipe.
23920A 13.REMOVE FUEL COOLER
Remove the 2 bolts and fuel cooler.
16295 14.REMOVE NO. 7 WATER BY-PASS HOSE
Slide the clamp and remove the No. 7 water by-pass hose from the fuel cooler.