Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE BOOSTER › from 2017.09
RM25T0E _54 Brake _029916 BRAKE SYSTEM (OTHER) _0138394 BRAKE BOOSTER A

BRAKE SYSTEM (OTHER)  BRAKE BOOSTER  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

Make sure to release the vacuum from the brake booster before removing the master cylinder from the brake booster.


HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 1.DRAIN BRAKE FLUID

NOTICE:

Wash off brake fluid immediately if it comes in contact with any painted surface.


Hide 44773F 3.REMOVE UNION TO CHECK VALVE HOSE

a.

Slide the clip and disconnect the hose.


Hide 47101A 4.REMOVE BRAKE PEDAL RETURN SPRING

Hide 47264A 5.REMOVE PUSH ROD PIN

Hide 47264D 6.REMOVE BRAKE MASTER CYLINDER PUSH ROD CLEVIS

a.

Loosen the push rod clevis lock nut.


b.

Remove the push rod clevis.


Hide 44610 7.REMOVE BRAKE BOOSTER ASSEMBLY

a.
C160910

Remove the 4 nuts.


b.

Pull out the brake booster with the brake booster gasket.


Hide 44735C 8.REMOVE BOOSTER BRACKET STOPPER RING

a.

Remove the 2 stopper rings from the brake booster.


Hide 44731C 9.REMOVE BRAKE BOOSTER BRACKET

Hide 44785 10.REMOVE BRAKE BOOSTER GASKET

Hide 44730 11.REMOVE BRAKE VACUUM CHECK VALVE ASSEMBLY (for 1GR-FE)

a.

Remove the brake vacuum check valve assembly from the brake booster.


Hide 44696 12.REMOVE CHECK VALVE GROMMET (for 1GR-FE)

a.

Remove the check valve grommet from the brake booster.