Home › Vehicle Interior › SEAT BELT › OCCUPANT DETECTION SENSOR (for Separate Seat Type without Inner Belt Attached) › from 2021.07
RM25T0E _58 Vehicle Interior _029931 SEAT BELT _0478954 OCCUPANT DETECTION SENSOR(for Separate Seat Type without Inner Belt Attached) A

SEAT BELT  OCCUPANT DETECTION SENSOR(for Separate Seat Type without Inner Belt Attached)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


NOTICE:

If the seat is set down in another location after removing it from the vehicle, the seat may tilt and damage the front inner seat track assembly RH or front outer seat track assembly RH due to the difference in shape between the left and right seat tracks.


PROCEDURE

Hide 1.REMOVE FRONT SEAT ASSEMBLY RH

HINT:

Use the same procedure described for the Driver side.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Separate Seat Type without Inner Belt Attached)>REMOVAL


Hide 71811C 2.REMOVE RECLINING ADJUSTER COVER RH

HINT:

Use the same procedure described for the Driver side.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Separate Seat Type without Inner Belt Attached)>DISASSEMBLY


Hide 3.REMOVE FRONT SEATBACK ASSEMBLY

HINT:

Use the same procedure described for the Driver side.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Separate Seat Type without Inner Belt Attached)>DISASSEMBLY


Hide 71071S 4.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER

HINT:

Use the same procedure described for the Driver side.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Separate Seat Type without Inner Belt Attached)>DISASSEMBLY


Hide 71511S 5.REMOVE SEPARATE TYPE FRONT SEAT CUSHION PAD (OCCUPANT DETECTION SENSOR)

a.

Remove the separate type front seat cushion pad (occupant detection sensor) from the separate type front seat cushion spring assembly.