Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
1.INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY
Install the headlight dimmer switch assembly onto the steering column making sure that the stopper protrusions and cutout parts align.
While loosening the band clamp, attach the claw to install the headlight dimmer switch assembly.
Connect the connector.
84650 2.INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY
84306 3.INSTALL SPIRAL CABLE SUB-ASSEMBLY
4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART
6.PERFORM DIAGNOSTIC SYSTEM CHECK
7.CHECK SRS WARNING LIGHT