1. PRECAUTION
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
67913 3.REMOVE FRONT DOOR SCUFF PLATE RH
for Double Cab: Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (for Double Cab)>REMOVAL
for Single Cab: Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (for Single Cab)>REMOVAL
62111A 4.REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH
89661 5.REMOVE ECM (for 1GR-FE LHD)
89533A 6.REMOVE NO. 2 4 WHEEL DRIVE CONTROL ECU
Disconnect the connector.
Remove the 2 nuts and No. 2 4 wheel drive control ECU.