1.INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER
Connect the connector to the tire pressure warning ECU and receiver.
Attach the 2 guides to temporarily install the tire pressure warning ECU and receiver.
Install the 2 bolts.
62512 2.INSTALL QUARTER INSIDE TRIM BOARD LH
73299 3.INSTALL NO. 2 QUARTER TRIM BELT HOLE COVER LH
73298B 4.INSTALL QUARTER TRIM BELT HOLE COVER LH
5.INSTALL REAR NO. 2 SEAT ASSEMBLY LH
6.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
7. REGISTRATION OF TRANSMITTER ID
8.INSPECT TIRE PRESSURE WARNING SYSTEM
9.PERFORM INITIALIZATION