1.INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER
Connect the connector to the tire pressure warning ECU and receiver.
Attach the 2 guides to temporarily install the tire pressure warning ECU and receiver.
Install the 2 bolts.
62512 2.INSTALL QUARTER INSIDE TRIM BOARD LH
73299 3.INSTALL NO. 2 QUARTER TRIM BELT HOLE COVER LH
73298B 4.INSTALL QUARTER TRIM BELT HOLE COVER LH
5.INSTALL REAR NO. 2 SEAT ASSEMBLY LH
6. REGISTRATION OF TRANSMITTER ID
7.INSPECT TIRE PRESSURE WARNING SYSTEM
8.PERFORM INITIALIZATION
9. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART