1. PRECAUTION
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
17129 3.REMOVE INTAKE AIR SURGE TANK
23801P 4.DISCONNECT NO. 1 FUEL PIPE SUB-ASSEMBLY
Disconnect the No. 1 fuel pipe sub-assembly from the fuel delivery pipe sub-assembly.
Click hereEngine / Hybrid System>1GR-FE (FUEL)>FUEL SYSTEM>PRECAUTION
23802B 5.DISCONNECT NO. 2 FUEL PIPE SUB-ASSEMBLY
Disconnect the No. 2 fuel pipe sub-assembly from the fuel pressure regulator assembly.
Click hereEngine / Hybrid System>1GR-FE (FUEL)>FUEL SYSTEM>PRECAUTION
23807 6.REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY
Disconnect the 6 fuel injector connectors from the fuel injector assemblies.
Remove the 6 bolts and fuel delivery pipe sub-assembly together with the 6 fuel injector assemblies.
Be careful not to drop the fuel injector assembly when removing the fuel delivery pipe sub-assembly.
23250 7.REMOVE FUEL INJECTOR ASSEMBLY
| *1 | Fuel Delivery Pipe Sub-assembly |
| *2 | Fuel Injector Assembly |
| *3 | Fuel Vibration Insulator |
Remove the 6 fuel injector assemblies from the fuel delivery pipe sub-assembly.
Remove the O-ring and fuel vibration insulator from each fuel injector assembly.