1. DISCHARGE FUEL SYSTEM PRESSURE
2. PRECAUTION
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
3.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
23802B 4.DISCONNECT NO. 2 FUEL PIPE SUB-ASSEMBLY
23280 5.REMOVE FUEL PRESSURE REGULATOR ASSEMBLY
Disconnect the vacuum hose from the fuel pressure regulator assembly.
Remove the 2 bolts and fuel pressure regulator assembly from the fuel delivery pipe sub-assembly.
Remove the O-ring from the fuel pressure regulator assembly.