Home › Vehicle Interior › PRE-COLLISION › FRONT CAMERA SYSTEM › from 2022.09
RM25T0E _58 Vehicle Interior _128087 PRE-COLLISION _0564254 FRONT CAMERA SYSTEM Y

PRE-COLLISION  FRONT CAMERA SYSTEM  HOW TO PROCEED WITH TROUBLESHOOTING  


CAUTION / NOTICE / HINT

HINT:
·

Before performing troubleshooting for the front camera system, perform troubleshooting for the pre-collision system.

Click hereVehicle Interior>PRE-COLLISION>PRE-COLLISION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING

·

Use the following procedure to troubleshoot the front camera system.

·

*: Use the GTS.



PROCEDURE

1.VEHICLE BROUGHT TO WORKSHOP
Result:
Proceed to
NEXT



NEXT

2.CUSTOMER PROBLEM ANALYSIS
2.CUSTOMER PROBLEM ANALYSIS
a.

Interview the customer and confirm the problem.


Result:
Proceed to
NEXT



NEXT

3.PRE-CHECK
3.PRE-CHECK
a.

Measure the battery voltage.

Standard voltage:

11 to 14 V


HINT:

If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.



b.

Check the fuses and relays.


c.

Check the connector connections and terminals to make sure that there are no abnormalities such as loose connections, deformation, etc.


Result:
Proceed to
NEXT



NEXT

4.CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*
4.CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

Result:
Result Proceed to
CAN DTCs are not output A
CAN DTCs are output B



A

5.CHECK FOR DTC*

B

5.CHECK FOR DTC*
a.

Using the GTS, check for DTCs.

Chassis > Front Recognition Camera > Trouble Codes
50001 430

b.

If a DTC is output, record the DTC.


Result:
Result Proceed to
DTCs are not output A
DTC C1AA800 is output B
DTC other than C1AA800 is output C



A

7.CHECK VEHICLE CONTROL HISTORY (RoB)*

B

GO TO DIAGNOSTIC TROUBLE CODE CHART (C1AA800)

C

6.RECONFIRM DTC OUTPUT*
6.RECONFIRM DTC OUTPUT*
a.

Using the GTS, clear the DTCs.

Chassis > Front Recognition Camera > Clear DTCs
50002 430

b.

Reproduce the vehicle conditions that were present when the DTCs that were noted were stored.

HINT:

Refer to each corresponding DTC for details on the detection conditions.

Click hereVehicle Interior>PRE-COLLISION>FRONT CAMERA SYSTEM>DIAGNOSTIC TROUBLE CODE CHART



c.

Using the GTS, check for DTCs.

Chassis > Front Recognition Camera > Trouble Codes
50001 430

Result:
Result Proceed to
DTCs are not output A
DTCs are output B



A

7.CHECK VEHICLE CONTROL HISTORY (RoB)*

B

7.CHECK VEHICLE CONTROL HISTORY (RoB)*
a.

Using the GTS, check for Vehicle Control History (RoB).

Chassis > Front Recognition Camera > Utility
Tester Display
Vehicle Control History (RoB)
50005 430 55

b.

Make a note of the output Vehicle Control History (RoB).


Result:
Result Proceed to
Vehicle Control History (RoB) is not output A
Vehicle Control History (RoB) other than X2015 and X201C is output B
Vehicle Control History (RoB) X2015 or X201C is output C



A

B

8.RECONFIRM VEHICLE CONTROL HISTORY (RoB)*

C

GO TO VEHICLE CONTROL HISTORY (RoB) (X2015 or X201C)

8.RECONFIRM VEHICLE CONTROL HISTORY (RoB)*
a.

Using the GTS, clear the Vehicle Control History (RoB).

Chassis > Front Recognition Camera > Utility
Tester Display
Vehicle Control History (RoB)
50005 430 55

b.

Using the GTS, check for Vehicle Control History (RoB).

Chassis > Front Recognition Camera > Utility
Tester Display
Vehicle Control History (RoB)
50005 430 55

Result:
Result Proceed to
Vehicle Control History (RoB) is not output A
Vehicle Control History (RoB) is output B



A

B