Use the same procedure as for the LHD and RHD vehicles.
The procedure listed below is for the LHD vehicles.
58903A
1.REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY
58917A
2.REMOVE REAR CONSOLE BOX COVER
|
Pull Out Direction |
|
Removal Direction |
85532C
3.REMOVE NO. 2 USB CHARGER SOCKET
|
Removal Direction | - | - |
85530
4.REMOVE NO. 1 POWER OUTLET SOCKET ASSEMBLY
|
Removal Direction | - | - |
Disconnect the No. 1 power outlet socket assembly connector.
Using a screwdriver with its tip wrapped with protective tape, detach the claw and remove the No. 1 power outlet socket assembly from the console box assembly.
85535B
5.REMOVE NO. 1 POWER OUTLET SOCKET COVER
|
Removal Direction | - | - |