| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | NO. 2 SPEAKER WITH BOX ASSEMBLY | 86150B | ( )
|
- | - |
| 2 | INSTRUMENT PANEL SAFETY PAD ASSEMBLY | - | - | - | - |
| 3 | INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL | - | - | - | ( )
|
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
86150B
1.INSTALL NO. 2 SPEAKER WITH BOX ASSEMBLY
Attach the guide to temporarily install No. 2 speaker with box assembly.
Install the No. 2 speaker with box assembly with the 2 screws in the order shown in the illustration.
2.INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY
3. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE
When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART