53292A
1.REMOVE UPPER RADIATOR SUPPORT SEAL
53291B
2.REMOVE RADIATOR COVER PLATE
53295
3.REMOVE LOWER RADIATOR AIR DEFLECTOR
4.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
for HFC-134a(R134a):
Click hereVehicle Interior>HEATING / AIR CONDITIONING>REFRIGERANT (for HFC-134a(R134a))>REPLACEMENT
for HFO-1234yf(R1234yf):
Click hereVehicle Interior>HEATING / AIR CONDITIONING>REFRIGERANT (for HFO-1234yf(R1234yf))>REPLACEMENT
5.REMOVE HEADLIGHT ASSEMBLY LH
88718L
6.REMOVE PIPING CLAMP
| *1 | No. 1 Liquid Tube |
| *2 | Liquid Tube Sub-assembly A |
| *a | SST |
Install SST to the piping clamp as shown in the illustration.
| *a | Push in |
Hold the No. 1 liquid tube and liquid tube sub-assembly A with each hand and push in SST with both thumbs.
Do not apply excessive force to the No. 1 liquid tube or liquid tube sub-assembly A as they may bend.
| *1 | Liquid Tube Sub-assembly A |
| *a | Stopper |
| *b | Pull off |
Raise the stopper of SST and remove SST and the piping clamp together from the No. 1 liquid tube and liquid tube sub-assembly A.
Remove the piping clamp from SST.
Remove the liquid tube sub-assembly A from the No. 1 liquid tube.
Remove the 2 O-rings from the No. 1 liquid tube.
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.