| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | GLOVE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY | 69550A | - | - | - |
| 2 | GLOVE COMPARTMENT DOOR CHECK CUSHION | 55557A | - | - | - |
| 3 | GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY | 55054 | - | - | - |
| *A | for RHD | - | - |
| *A | for LHD | *B | for RHD |
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
69550A
1.INSTALL GLOVE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY
55557A
2.INSTALL GLOVE COMPARTMENT DOOR CHECK CUSHION
55054
3.INSTALL GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY
58810J
4.INSTALL CONSOLE BOX ASSEMBLY
58815C
5.INSTALL CONSOLE BOX CARPET
58903A
6.INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY
55435A
7.INSTALL INSTRUMENT PANEL FINISH PANEL END RH (for LHD)
55433B
8.INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL (for RHD)
55501A
9.INSTALL GLOVE COMPARTMENT DOOR SUB-ASSEMBLY (for RHD)
| *a | Horizontal Position | *b | Closed Position |
|
Install in this Direction | - | - |
With the glove compartment door sub-assembly opened position, attach the hinge horizontally.
Attach the hinge from the top will deform the hinge. Be sure to install the glove compartment door sub-assembly horizontally.
| *1 | Glove Compartment Door Stopper Sub-assembly | - | - |
| *a | Stopper | - | - |
|
Install in this Direction | - | - |
Slightly bend the stoppers (A) and (B) in the directions indicated by the arrows in the illustration and attach the stoppers to install the glove compartment door sub-assembly.
Attach the claw to install the glove compartment door stopper sub-assembly.
55479D
10.INSTALL LOWER INSTRUMENT CLUSTER FINISH PANEL GARNISH (for RHD)
55318F
11.INSTALL NO. 2 INSTRUMENT SIDE PANEL
55607
12.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
67913
13.INSTALL FRONT DOOR SCUFF PLATE RH
55046A
14.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH
55606
15.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
16.INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY
55470
17.INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY
58834B
18.INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH
58833B
19.INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH