|
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
84233
1.INSTALL FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY
Connect the connector.
Using a T30 "TORX" socket wrench, install the front door courtesy light switch assembly with the "TORX" screw.
62414A
2.INSTALL LOWER CENTER PILLAR GARNISH LH
67918F
5.INSTALL REAR DOOR SCUFF PLATE INSIDE LH
67914B
6.INSTALL FRONT DOOR SCUFF PLATE LH