81081
1.INSTALL INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY
| *a | Marking | - | - |
|
Fastening Tape | - | - |
Attach the interior illumination light sub-assembly with the fastening tape.
Align the fastening tape with the marking when attaching it.
Attach the claw, connect the connector and install the interior illumination light sub-assembly.
63310
3.INSTALL ROOF HEADLINING ASSEMBLY
4. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART
When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART