| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Priority | Note |
|---|---|---|---|---|---|---|
| B2451 | Vehicle Specifications have not been Stored | Detection condition:
Ignition switch ON Malfunction status:
Vehicle specifications have not been stored Malfunction duration:
- |
Headlight ECU sub-assembly LH | AFS | A | w/ Adaptive High Beam System |
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Priority | Note |
|---|---|---|---|---|---|---|
| B2451 | Vehicle Specifications have not been Stored | Detection condition:
Ignition switch ON Malfunction status:
Vehicle specifications have not been stored Malfunction duration:
- |
Headlight ECU sub-assembly LH | HL AutoLeveling | A | w/o Adaptive High Beam System |
If the headlight ECU sub-assembly LH has been replaced, it is necessary to synchronize the vehicle information and initialize the headlight ECU sub-assembly LH.
Click hereVehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM>REGISTRATION
Synchronize the vehicle information.
Click hereVehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM>REGISTRATION
| Proceed to |
|---|
| NEXT |
NEXT
Check vehicle condition.
| Result | Proceed to |
|---|---|
| w/ Adaptive High Beam System | A |
| w/o Adaptive High Beam System | B |
A
B
Check for DTCs.
| Result | Proceed to |
|---|---|
| B2451 is not output | A |
| B2451 is output | B |
A
B
Check for DTCs.
| Result | Proceed to |
|---|---|
| B2451 is not output | A |
| B2451 is output | B |
A
B