Home › ADAS / AD › ADVANCED DRIVER ASSISTANCE SYSTEM › CAMERA HEATER
RM37H0E _95 ADAS / AD _095317 ADVANCED DRIVER ASSISTANCE SYSTEM _0454697 CAMERA HEATER A

ADVANCED DRIVER ASSISTANCE SYSTEM  CAMERA HEATER  REMOVAL  


CAUTION / NOTICE / HINT

COMPONENTS (REMOVAL)
B593364N01
2.156,3.25 2.583,3.25 false 1.688,1.052 2.094,1.052 false 1.49,0.875 1.771,1.229 0.281,0.354 18 false 2 1.99,3.094 2.271,3.448 0.281,0.354 18 false 1

Procedure Part Name Code
Z101186

Z101188

Z101187

1 FORWARD RECOGNITION CAMERA 8646C - - -
2 FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY 86401 (Click here) - -

PROCEDURE

Hide 8646C 1.REMOVE FORWARD RECOGNITION CAMERA

Hide 86401 2.REMOVE FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY

Z101186

NOTICE:
B601031

·

Do not pull the harness forcibly when disconnecting the connector.

·

Do not touch the inner surface of the forward recognition with heater hood sub-assembly.

·

Do not apply force to the heating element of the forward recognition with heater hood sub-assembly or an open circuit may result.




a.
B601032C01
2.167,0.5 1.49,0.365 true 1.24,1.052 0.729,0.875 true 1.438,0.875 0.74,0.875 true 1.656,0.729 0.75,0.875 true 1.865,0.604 0.75,0.875 true 3,0.375 3.177,0.677 0.177,0.302 18 true i 2.365,0.573 2.552,0.854 0.188,0.281 18 true ii 0.5,0.375 0.74,0.667 0.24,0.292 18 true iii 0.51,0.802 0.76,0.958 0.25,0.156 10 true *b 1.313,0.292 1.563,0.448 0.25,0.156 10 true *a 2.094,0.667 2.24,0.823 0.146,0.156 10 true 1 1.875,0.813 2.031,0.969 0.156,0.156 10 true 2 1.635,0.906 1.802,1.083 0.167,0.177 10 true 3 1.167,1.208 1.333,1.375 0.167,0.167 10 true 4 6.167,0.74 6.406,1.031 0.24,0.292 18 true iv 6.594,1.073 6.833,1.365 0.24,0.292 18 true v
*a Connector Clamp *b Guide
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)


i.

Disconnect the connector.

NOTICE:

When disconnecting the connector, do not forcibly pull the wire harness.



ii.

Detach the connector clamp.


iii.

Remove the wire harness from the guide in the order shown in the illustration.

NOTICE:

Do not pull the harness forcibly when remove the wire harness.



iv.

Pull the forward recognition with heater hood sub-assembly in the direction indicated by the arrow (1) shown in the illustration to detach the claw.


v.

Pull the forward recognition with heater hood sub-assembly in the direction indicated by the arrow (2) shown in the illustration to detach the guide and remove the forward recognition with heater hood sub-assembly.