Home › ADAS / AD › ADVANCED DRIVER ASSISTANCE SYSTEM › CAMERA HEATER
RM37H0E _95 ADAS / AD _095317 ADVANCED DRIVER ASSISTANCE SYSTEM _0454697 CAMERA HEATER A

ADVANCED DRIVER ASSISTANCE SYSTEM  CAMERA HEATER  INSTALLATION  


CAUTION / NOTICE / HINT

COMPONENTS (INSTALLATION)
B601033N01
5.51,1.563 5.771,1.563 false 1.396,0.75 1.708,0.75 1.708,0.75 2.073,1.042 false 5.865,1.396 6.146,1.75 0.281,0.354 18 false 2 1.156,0.615 1.427,0.896 0.271,0.281 18 false 1

Procedure Part Name Code
Z101186

Z101188

Z101187

1 FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY 86401 (Click here) - -
2 FORWARD RECOGNITION CAMERA 8646C - - -

PROCEDURE

Hide 86401 1.INSTALL FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY

Z101186

NOTICE:
B601031

·

Do not touch the inner surface of the forward recognition with heater hood sub-assembly.

·

Do not apply force to the heating element of the forward recognition with heater hood sub-assembly or an open circuit may result.




a.
B601034C01
4.927,1.563 4.073,1.271 true 5.104,1.396 4.052,1.271 true 5.281,1.24 4.052,1.271 true 5.51,1.094 4.073,1.26 true 5.833,0.979 5.427,0.833 true 5.281,0.719 5.542,0.917 0.26,0.198 10 true *a 3.885,1.208 4.146,1.406 0.26,0.198 10 true *b 5.74,1.125 5.906,1.281 0.167,0.156 10 true 4 5.51,1.26 5.677,1.417 0.167,0.156 10 true 3 5.333,1.417 5.5,1.573 0.167,0.156 10 true 2 4.865,1.708 5.031,1.865 0.167,0.156 10 true 1 2.781,2 3.021,2.313 0.24,0.313 18 false i 1.146,1.646 1.302,1.917 0.156,0.271 18 true ii 4.156,0.917 4.375,1.177 0.219,0.26 18 true iii 6.354,0.844 6.573,1.104 0.219,0.26 18 true v 6.031,1.063 6.302,1.333 0.271,0.271 18 true iv
*a Connector Clamp *b Guide
V113147

Install in this Direction (1)
V113148

Install in this Direction (2)
V100155

Heater Area - -


i.

Insert the forward recognition with heater hood sub-assembly in the direction indicated by the arrow (1) in the illustration to attach the guide.


ii.

Attach the claw in the direction indicated by the arrow (2) in the illustration.

NOTICE:
·

Make sure that the 2 claws are attached as shown in the illustration. Failure to do so may result in the malfunction of systems that use the forward recognition camera.

·

Do not apply force to the heating element of the forward recognition with heater hood sub-assembly or an open circuit may result.




iii.

Install the wire harness to the guide in the order shown in the illustration.

NOTICE:

Make sure that the clamp and 4 guides are attached as shown in the illustration. Failure to do so may result in the malfunction of systems that use the forward recognition camera.



iv.

Attach the connector clamp to install the forward recognition with heater hood sub-assembly.

NOTICE:

As the No. 1 forward recognition cover cannot be installed correctly if the connector clamp is not attached securely, make sure to attach the connector clamp securely.



v.

Connect the connector.



Hide 8646C 2.INSTALL FORWARD RECOGNITION CAMERA