Home › ADAS / AD › ADVANCED DRIVER ASSISTANCE SYSTEM › FRONT CAMERA
RM37H0E _95 ADAS / AD _095317 ADVANCED DRIVER ASSISTANCE SYSTEM _0454696 FRONT CAMERA A

ADVANCED DRIVER ASSISTANCE SYSTEM  FRONT CAMERA  INSTALLATION  


CAUTION / NOTICE / HINT

COMPONENTS (INSTALLATION)
B601029N02
1.708,0.75 2.104,0.75 false 4.521,2.063 4.917,2.063 false 5.854,2.885 6.25,2.885 false 5.573,0.865 6.333,0.865 false 6.385,0.219 6.781,0.219 false 2.344,1.438 2.719,1.167 2.719,1.167 3,1.167 false 2.5,0.594 2.781,0.948 0.281,0.354 18 false 1 3.302,1.042 3.583,1.396 0.281,0.354 18 false 2 4.969,1.938 5.25,2.292 0.281,0.354 18 false 3 6.292,2.74 6.573,3.094 0.281,0.354 18 false 4 6.417,0.729 6.698,1.083 0.281,0.354 18 false 5 6.188,0.073 6.625,0.438 0.438,0.365 18 false 6

Procedure Part Name Code
Z101186

Z101188

Z101187

1 FORWARD RECOGNITION CAMERA 8646C (Click here) - -
2 FORWARD RECOGNITION LATCH 86464A (Click here) - -
3 NO. 1 FORWARD RECOGNITION COVER 86466D - - -
4 NO. 2 FORWARD RECOGNITION COVER 86466E - - -
5 FRONT ROOF TOP GARNISH 75631L - - -
6 ADJUST FORWARD RECOGNITION CAMERA 8646C - - (Click here)

PROCEDURE

Hide 8646C 1.INSTALL FORWARD RECOGNITION CAMERA

Z101186

NOTICE:
·

When replacing the forward recognition camera, replace it with a new one.

·

If the forward recognition camera is not properly installed, forward recognition camera optical axis learning cannot be performed properly. Make sure the forward recognition camera is installed securely.

·

Do not touch the camera lens. If the camera lens has been touched, do not use the forward recognition camera.

·

Replace the forward recognition camera if there is any foreign matter on the camera lens.

·

If the forward recognition camera bracket is deformed or damaged, replace it together with the windshield glass.

·

When replacing the windshield glass of a vehicle equipped with a forward recognition camera, make sure to use a Toyota genuine part. If a non-Toyota genuine part is used, the forward recognition camera may not be able to be installed due to a missing bracket. Also the dynamic radar cruise control system, front camera system, lane tracing assist system, road sign assist system, pre-collision system, adaptive high beam system or automatic high beam system may not operate properly due to a difference in the transmissivity or black ceramic border.

·

If there is any foreign matter on the area of the windshield glass in front of the forward recognition camera, clean the windshield glass before installing the forward recognition camera. Install the hood with heater sub-assembly and forward recognition camera.

Forward recognition hood removal: Click here(Click here)

Forward recognition hood installation: Click here(Click here)




Hide 86464A 2.INSTALL FORWARD RECOGNITION LATCH

Z101186

NOTICE:

Before installing the forward recognition latch, be sure to check that the forward recognition camera is securely installed.



Hide 86466D 3.INSTALL NO. 1 FORWARD RECOGNITION COVER

Hide 86466E 4.INSTALL NO. 2 FORWARD RECOGNITION COVER

Hide 75631L 5.INSTALL FRONT ROOF TOP GARNISH

Hide 8646C 6.ADJUST FORWARD RECOGNITION CAMERA

a.

If the forward recognition camera has been replaced with a new one or the windshield glass has been removed and installed, it is necessary to perform Forward Recognition Camera Learning.

HINT:

Forward Recognition Camera Learning can be performed by using either Target Adjustment (One Time Recognition) or Target Adjustment (Sequential Recognition) or Driving Adjustment.

Target Adjustment (One Time Recognition):

Click hereADAS / AD>ADVANCED DRIVER ASSISTANCE SYSTEM>FRONT CAMERA>TARGET ADJUSTMENT(ONE TIME RECOGNITION)

Target Adjustment (Sequential Recognition):

Click hereADAS / AD>ADVANCED DRIVER ASSISTANCE SYSTEM>FRONT CAMERA>TARGET ADJUSTMENT(SEQUENTIAL RECOGNITION)

Driving Adjustment:

Click hereADAS / AD>ADVANCED DRIVER ASSISTANCE SYSTEM>FRONT CAMERA>DRIVING ADJUSTMENT