| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | INTERCOOLER ASSEMBLY WITH SENSOR | 17900 | - | - | - |
| 2 | WATER PUMP ASSEMBLY WITH MOTOR | G9040D | ( )
|
- | - |
| 3 | WATER PUMP BRACKET | 87121W | - | - | - |
| *1 | WATER HOSE SUB-ASSEMBLY | *2 | HEATER ACCESSORY ASSEMBLY |
17900
1.REMOVE INTERCOOLER ASSEMBLY WITH SENSOR
G9040D
2.REMOVE WATER PUMP ASSEMBLY WITH MOTOR
Detach the claw and disconnect the wire harness.
Disconnect the connector and remove the 2 bolts.
Using pliers, grip the claws of the clip and slide the clip to disconnect the water hose sub-assembly.
Do not apply excessive force to the water hose sub-assembly.
Prepare a drain pan or cloth in case the coolant leaks.
Using pliers, grip the claws of the clip and slide the clip to disconnect the heater accessory assembly.
Do not apply excessive force to the heater accessory assembly.
Prepare a drain pan or cloth in case the coolant leaks.
87121W
3.REMOVE WATER PUMP BRACKET