| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | FRONT SEAT INNER BELT ASSEMBLY LH | 73240 | ( )
|
- | - |
| 2 | FRONT SEAT INNER BELT ASSEMBLY RH | 73230 | ( )
|
- | - |
| 3 | FRONT SEAT ASSEMBLY LH | - | - | - | - |
| *A | for Driver Side | *B | for Front Passenger Side |
|
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf) | - | - |
Wear protective gloves. Sharp areas on the parts may injure your hands.
There is risk of injury.
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
Use the same procedure for the RH and LH sides.
The following procedure is for the LH side.
73240
1.INSTALL FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side)
| *a | Protruding Part | - | - |
|
Connector |
|
Nut |
Install the front seat inner belt assembly LH with the nut.
Do not allow the anchor part of the front seat inner belt assembly LH to overlap the protruding part.
Attach the claw and clamp.
Connect the connector.
73230
2.INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side)
| *a | Protruding Part | - | - |
|
Connector |
|
Nut |
Install the front seat inner belt assembly RH with the nut.
Do not allow the anchor part of the front seat inner belt assembly RH to overlap the protruding part.
Attach the clamp.
Connect the connector.
3.INSTALL FRONT SEAT ASSEMBLY LH