Home › Suspension › TIRE PRESSURE MONITORING › TIRE PRESSURE WARNING SYSTEM
RM37H0E _53 Suspension _096766 TIRE PRESSURE MONITORING _0454878 TIRE PRESSURE WARNING SYSTEM C

TIRE PRESSURE MONITORING  TIRE PRESSURE WARNING SYSTEM  C2178  Vehicle Speed Information Communication Lost  


DESCRIPTION

The tire pressure warning ECU and receiver receives signals from the combination meter assembly via CAN communication. If a malfunction occurs in this communication line, DTC C2178 is output.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
C2178 Vehicle Speed Information Communication Lost Communication between the combination meter assembly and tire pressure warning ECU and receiver is interrupted for 10 seconds or more.
·

Meter / gauge system

·

Tire pressure warning ECU and receiver


Tire Pressure Monitor A

CAUTION / NOTICE / HINT

NOTICE:
·

When replacing the tire pressure warning ECU and receiver, first use the GTS to record all of the current IDs and registered tires with transmitters (4 or 5 tires) of the tire pressure warning valve and transmitter registered to the tire pressure warning ECU and receiver.

·

It is necessary to perform initializationSuspension>TIRE PRESSURE MONITORING>TIRE PRESSURE WARNING SYSTEM>INITIALIZATIONafter registrationSuspension>TIRE PRESSURE MONITORING>TIRE PRESSURE WARNING SYSTEM>REGISTRATIONof the transmitter IDs into the tire pressure warning ECU and receiver if the ECU has been replaced.



PROCEDURE

1.CHECK VEHICLE TYPE
Result:
Result Proceed to
excluding JPD20R-CEDSSW (w/ Panic Switch) A
for JPD20R-CEDSSW (w/ Panic Switch) B



A

2.INSPECT COMBINATION METER ASSEMBLY (OPERATION CHECK)

B

3.INSPECT COMBINATION METER ASSEMBLY (OPERATION CHECK)
2.INSPECT COMBINATION METER ASSEMBLY (OPERATION CHECK)
a.

Perform Operation Check of the meter/gauge system.

HINT:
·

Check the meter function by referring to Operation Check for the combination meter assembly.




Result:
Result Proceed to
Combination meter assembly is normal A
Combination meter assembly is malfunctioning B



A

B

3.INSPECT COMBINATION METER ASSEMBLY (OPERATION CHECK)
a.

Perform Operation Check of the meter/gauge system.

HINT:
·

Check the meter function by referring to Operation Check for the combination meter assembly.




Result:
Result Proceed to
Combination meter assembly is normal A
Combination meter assembly is malfunctioning B



A

B