Home › ADAS / AD › ADVANCED DRIVER ASSISTANCE SYSTEM › DYNAMIC RADAR CRUISE CONTROL SYSTEM
RM37H0E _95 ADAS / AD _095317 ADVANCED DRIVER ASSISTANCE SYSTEM _0455732 DYNAMIC RADAR CRUISE CONTROL SYSTEM J

ADVANCED DRIVER ASSISTANCE SYSTEM  DYNAMIC RADAR CRUISE CONTROL SYSTEM  Cruise Main Indicator Light Circuit  


DESCRIPTION

When the dynamic radar cruise control system is turned on using the cruise control main switch, the cruise control indicator (vehicle-to-vehicle distance control mode) illuminates. The EV control ECU uses this and other indicators to indicate the status (presence or absence of a preceding vehicle, vehicle-to-vehicle distance, malfunction of system or related systems) of the dynamic radar cruise control system.

CAUTION / NOTICE / HINT

NOTICE:
·

Before replacing the EV control ECU, refer to Service Bulletin.

·

When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.



PROCEDURE

1.PERFORM ACTIVE TEST USING GTS (Combination Meter)
a.

Perform the Active Test according to the display on the GTS.

Body Electrical > Combination Meter > Active Test
Tester Display Measurement Item Control Range Diagnostic Note
Meter Display (All) Completely illuminates the multi-information display ON Confirm that the vehicle is stopped with the ignition switch ON.
Body Electrical > Combination Meter > Active Test
Tester Display
Meter Display (All)
50004 409 277

Result:
Result Proceed to
The multi-information display in the combination meter assembly turns on according to the operation of the Active Test A
The multi-information display in the combination meter assembly does not turn on according to the operation of the Active Test B



A

2.READ VALUE USING GTS (Radar Cruise1)

B

2.READ VALUE USING GTS (Radar Cruise1)
a.

Read the Data List according to the display on the GTS.

Powertrain > Radar Cruise1 > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Cruise Indicator Cruise control indicator status ON or OFF ON: Cruise control indicator illuminated
OFF: Cruise control indicator off
-
Powertrain > Radar Cruise1 > Data List
Tester Display
Cruise Indicator
50003 399 20

Result:
Result Proceed to
The cruise control indicator illuminates and turns off according to the operation of the cruise control main switch A
The cruise control indicator does not illuminate but the Data List items change according to the operation of the cruise control main switch B
The cruise control indicator does not illuminate and the Data List items do not change according to the operation of the cruise control main switch C



A

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

B

REPLACE COMBINATION METER ASSEMBLY

C