Home › Brake › PARKING BRAKE › ELECTRIC PARKING BRAKE SYSTEM
RM37H0E _54 Brake _096946 PARKING BRAKE _0455727 ELECTRIC PARKING BRAKE SYSTEM J

PARKING BRAKE  ELECTRIC PARKING BRAKE SYSTEM  Message Not Displayed on Multi-information Display When AUTO Function Set to ON/OFF  


DESCRIPTION

When the AUTO function is set to ON/OFF, a message is displayed on the multi-information display in the combination meter assembly.

WIRING DIAGRAM

C403409E12
1.177,0.583 4.75,1 3.573,0.417 10 false No. 2 Skid Control ECU (Brake Actuator Assembly) 1.167,0.979 4.49,1.417 3.323,0.438 10 false - Multi-information Display Request Signal 1.177,2.583 4.5,3.021 3.323,0.438 10 false Combination Meter Assembly 1.177,2.979 4.5,3.417 3.323,0.438 10 false - Multi-information Display 0.844,4.156 4.167,4.594 3.323,0.438 10 false : CAN Communication Line

PROCEDURE

1.CHECK OPERATION OF AUTO FUNCTION
a.

Check that the AUTO function operates when the operating conditions are met.

HINT:

Do not use the multi-information display to determine whether the AUTO function is operating or not.



Result:
Result Proceed to
The AUTO function operates A
The AUTO function does not operate B



A

REPLACE COMBINATION METER ASSEMBLY

B

GO TO Electric Parking Brake System AUTO Function Circuit