Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › TOYOTA PARKING ASSIST-SENSOR SYSTEM
RM37H0E _56 Audio / Visual / Telematics _095293 PARK ASSIST / MONITORING _0455111 TOYOTA PARKING ASSIST-SENSOR SYSTEM C

PARK ASSIST / MONITORING  TOYOTA PARKING ASSIST-SENSOR SYSTEM  C1AE087  Ultrasonic Sensor (Front Left Side) Missing Message  


DESCRIPTION

This DTC is output when an open circuit or short occurs in the communication line between a front side ultrasonic sensor (FLS sensor) and the front side ultrasonic sensor (FRS sensor) assembly, or when a malfunction occurs in a front side ultrasonic sensor (FLS sensor) on the front.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
C1AE087 Ultrasonic Sensor (Front Left Side) Missing Message Front side ultrasonic sensor (FLS sensor) lost communication
·

Front side ultrasonic sensor (FLS sensor)

·

Harness or connector

·

Clearance warning ECU assembly


Clearance Warning B

WIRING DIAGRAM

E396746E14
5.25,2 6.677,2.344 1.427,0.344 10 false Clearance Warning ECU Assembly 5.25,1.833 5.927,2.063 0.677,0.229 10 false G20 2.833,2 4.625,2.406 1.792,0.406 10 false Front Side Ultrasonic Sensor (FRS sensor) 2.833,1.833 3.854,2 1.021,0.167 10 false A88 0.5,1.833 1.521,2 1.021,0.167 10 false A87 0.5,2 2.292,2.396 1.792,0.396 10 false Front Side Ultrasonic Sensor (FLS sensor) 3.073,0.969 3.385,1.167 0.313,0.198 10 false SO 3.094,0.583 3.406,0.781 0.313,0.198 10 false BO 3.094,1.323 3.406,1.521 0.313,0.198 10 false EO 1.646,0.615 1.958,0.813 0.313,0.198 10 false BI 1.698,1.333 2.01,1.531 0.313,0.198 10 false EI 3.979,0.979 4.292,1.177 0.313,0.198 10 false SI 3.958,0.604 4.271,0.802 0.313,0.198 10 false BI 3.969,1.333 4.281,1.531 0.313,0.198 10 false EI 5.344,0.969 5.708,1.167 0.365,0.198 10 false LIN1 5.344,0.563 5.76,0.76 0.417,0.198 10 false CSB1 5.354,1.333 5.771,1.531 0.417,0.198 10 false CSG1 5.135,1.198 5.5,1.396 0.365,0.198 10 false 6 4.219,0.844 4.583,1.042 0.365,0.198 10 false 5 5.135,0.833 5.5,1.031 0.365,0.198 10 false 5 4.229,0.479 4.594,0.677 0.365,0.198 10 false 4 4.219,1.198 4.583,1.396 0.365,0.198 10 false 6 5.135,0.479 5.5,0.677 0.365,0.198 10 false 7 2.865,0.854 3.229,1.052 0.365,0.198 10 false 2 2.875,0.51 3.24,0.708 0.365,0.198 10 false 1 2.865,1.188 3.229,1.385 0.365,0.198 10 false 3 1.948,0.865 2.313,1.063 0.365,0.198 10 false 5 1.948,0.531 2.313,0.729 0.365,0.198 10 false 4 1.948,1.198 2.313,1.396 0.365,0.198 10 false 6 1.656,0.979 1.969,1.177 0.313,0.198 10 false SI

CAUTION / NOTICE / HINT

NOTICE:
·

Perform registration after replacing or removing and installing the ultrasonic sensor or clearance warning ECU assembly.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>TOYOTA PARKING ASSIST-SENSOR SYSTEM>CALIBRATION

·

If a DTC is detected again after the repair, turn the ignition switch to ON and turn the TOYOTA parking assist-sensor system on, and then clear the DTC.

·

If C1AE596 is output at the same time, check C1AE596 first.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>TOYOTA PARKING ASSIST-SENSOR SYSTEM>C1AE596



PROCEDURE

1.VEHICLE CONDITION AND WORK DETAILS CHECK
a.

Check the vehicle condition and work details.


Result:
Result Proceed to
The clearance warning ECU assembly or ultrasonic sensor has not been replaced A
The clearance warning ECU assembly or ultrasonic sensor has been replaced B



A

2.CHECK CONNECTOR CONNECTION CONDITION (ULTRASONIC SENSOR)

B

2.CHECK CONNECTOR CONNECTION CONDITION (ULTRASONIC SENSOR)
a.

Check that the connector is properly connected to the front side ultrasonic sensor.


Result:
Proceed to
NEXT



NEXT

3.CLEAR DTC
3.CLEAR DTC
a.

Clear the DTCs.

Body Electrical > Clearance Warning > Clear DTCs
50002 438

Result:
Proceed to
NEXT



NEXT

4.CHECK FOR DTC
4.CHECK FOR DTC
a.

Check for DTCs.

Body Electrical > Clearance Warning > Trouble Codes
50001 438

Result:
Result Proceed to
C1AE087 is not output A
C1AE087 is output B



A

END (CONNECTOR CONNECTION MALFUNCTION)

B

5.CHECK CONNECTOR CONNECTION CONDITION (CLEARANCE WARNING ECU ASSEMBLY)
5.CHECK CONNECTOR CONNECTION CONDITION (CLEARANCE WARNING ECU ASSEMBLY)
a.

Check that the connector is properly connected to the clearance warning ECU assembly.


Result:
Proceed to
NEXT



NEXT

6.CLEAR DTC
6.CLEAR DTC
a.

Clear the DTCs.

Body Electrical > Clearance Warning > Clear DTCs
50002 438

Result:
Proceed to
NEXT



NEXT

7.CHECK FOR DTC
7.CHECK FOR DTC
a.

Check for DTCs.

Body Electrical > Clearance Warning > Trouble Codes
50001 438

Result:
Result Proceed to
C1AE087 is not output A
C1AE087 is output B
C1AE087 and C1AE587 are output C



A

B

8.CHECK HARNESS AND CONNECTOR (FRONT SIDE ULTRASONIC SENSOR [FRS SENSOR] - FRONT SIDE ULTRASONIC SENSOR [FLS SENSOR])

C

8.CHECK HARNESS AND CONNECTOR (FRONT SIDE ULTRASONIC SENSOR [FRS SENSOR] - FRONT SIDE ULTRASONIC SENSOR [FLS SENSOR])

Pre-procedure1

a.

Disconnect the A88 front side ultrasonic sensor (FRS sensor) connector.


b.

Disconnect the A87 front corner ultrasonic sensor (FLS sensor) connector.


Procedure1

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(A88,A87)Location & Routing

Click Connector(A88)Engine Compartment>Front Compartment Main Wire / No. 3 Front Compartment Wire / No. 4 Front Compartment Wire>Front Side Ultrasonic Sensor RH

Click Connector(A87)Engine Compartment>Front Compartment Main Wire / No. 3 Front Compartment Wire / No. 4 Front Compartment Wire>Front Side Ultrasonic Sensor LH

A88-1 (BO) - A87-4 (BI) Always Below 1 Ω
A88-2 (SO) - A87-5 (SI) Always Below 1 Ω
A88-3 (EO) - A87-6 (EI) Always Below 1 Ω
A88-1 (BO) or A87-4 (BI) - Body ground Always 10 kΩ or higher
A88-2 (SO) or A87-5 (SI) - Body ground Always 10 kΩ or higher
A88-3 (EO) or A87-6 (EI) - Body ground Always 10 kΩ or higher


Result:
Proceed to
OK
NG



Post-procedure1

a.

None



OK

9.REPLACE FRONT SIDE ULTRASONIC SENSOR (FLS SENSOR)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

9.REPLACE FRONT SIDE ULTRASONIC SENSOR (FLS SENSOR)
a.

Replace the front side ultrasonic sensor (FLS sensor) with a known good one.

HINT:

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>ULTRASONIC SENSOR (for Front)>REMOVAL


HINT:

All of the sensors are interchangeable. To confirm whether a sensor is functioning normally, switch it with a known good sensor from the other end of the vehicle.



Result:
Proceed to
NEXT



NEXT

10.CLEAR DTC
10.CLEAR DTC
a.

Clear the DTCs.

Body Electrical > Clearance Warning > Clear DTCs
50002 438

Result:
Proceed to
NEXT



NEXT

11.CHECK FOR DTC
11.CHECK FOR DTC
a.

Check for DTCs.

Body Electrical > Clearance Warning > Trouble Codes
50001 438

Result:
Result Proceed to
C1AE087 is not output A
C1AE087 is output B



A

END (FRONT SIDE ULTRASONIC SENSOR [FLS SENSOR] WAS DEFECTIVE)

B