The EV control ECU transmits and receives signals via CAN communication to and from each ECU.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Warning Indicate | DTC Output from | Priority |
|---|---|---|---|---|---|---|
| U010487 | Lost Communication with Cruise Control Module Missing Message | A CAN communication error between the driving support ECU assembly and EV control ECU (CAN communication system malfunction) occurs
(1 trip detection logic) |
CAN communication system | Master Warning:
Does not come on |
EV | B |
| U012287 | Lost Communication with Vehicle Dynamics Control Module Missing Message | A CAN communication error between the skid control ECU assembly and EV control ECU (CAN communication system malfunction) occurs
(1 trip detection logic) |
CAN communication system | Master Warning:
Comes on |
EV | B |
| U012587 | Lost Communication With Multi-axis Acceleration Sensor Module Missing Message | A CAN communication error between the EV control ECU and airbag ECU assembly (CAN communication system malfunction) occurs
(1 trip detection logic) |
CAN communication system | Master Warning:
Comes on |
EV | B |
| U012987 | Lost Communication with Brake System Control Module Missing Message | A CAN communication error (V BUS) between the skid control ECU assembly and EV control ECU (CAN communication system malfunction) occurs
(1 trip detection logic) |
CAN communication system | Master Warning:
Comes on |
EV | B |
| U014087 | Lost Communication with Body Control Module Missing Message | A CAN communication error between the main body ECU and EV control ECU (CAN communication system malfunction) occurs
(1 trip detection logic) |
CAN communication system | Master Warning:
Comes on |
EV | B |
| U015187 | Lost Communication with Restraints Control Module Missing Message | A CAN communication error between the airbag ECU assembly and EV control ECU (CAN communication system malfunction) occurs
(1 trip detection logic) |
CAN communication system | Master Warning:
Comes on |
EV | B |
| U016487 | Lost Communication with HVAC Control Module Missing Message | A CAN communication error between the air conditioning amplifier assembly and EV control ECU (CAN communication system malfunction) occurs
(1 trip detection logic) |
CAN communication system | Master Warning:
Does not come on |
EV | B |
| U029387 | Lost Communication with Hybrid/EV Powertrain Control Module Missing Message | A CAN communication error between the skid control ECU assembly and EV control ECU (CAN communication system malfunction) occurs
(1 trip detection logic) |
CAN communication system | Master Warning:
Does not come on |
EV | B |
| U110787 | Lost Communication with Power Management Module Missing Message | A CAN communication error between the certification ECU (smart key ECU assembly) (CAN communication system malfunction) occurs
(1 trip detection logic) |
CAN communication system | Master Warning:
Comes on |
EV | B |
| U111087 | Lost Communication with Clearance Sonar Module Missing Message | A CAN communication error between the clearance warning ECU assembly (CAN communication system malfunction) occurs
(1 trip detection logic) |
CAN communication system | Master Warning:
Comes on |
EV | B |
| U117087 | Lost Communication with Brake System Control Module (Secondary CAN Line) Missing Message | A CAN communication error between the skid control ECU assembly and EV control ECU (CAN communication system malfunction) occurs
(1 trip detection logic) |
CAN communication system | Master Warning:
Comes on |
EV | B |
| U117587 | Lost Communication with Hybrid/EV Battery Energy Control Module "A" (Powertrain Bus) Missing Message | A CAN communication error between the battery ECU assembly (CAN communication system malfunction) occurs
(1 trip detection logic) |
CAN communication system | Master Warning:
Comes on |
EV | B |
| U117687 | Lost Communication with Gear Shift Control Module "A" (Powertrain Bus) Missing Message | A CAN communication error between the shift control ECU and EV control ECU (CAN communication system malfunction) occurs
(1 trip detection logic) |
CAN communication system | Master Warning:
Comes on |
EV | B |
After repair has been completed, clear the DTC and then check that the vehicle has returned to normal by performing the following All Readiness check procedure.
Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>HYBRID CONTROL SYSTEM>UTILITY
Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).
Turn the ignition switch off and wait for 10 minutes or more.
Turn the ignition switch to ON (READY) and wait for 2 minutes or more.
Enter the following menus: Powertrain / EV / Utility / All Readiness.
Check the DTC judgment result.
If the judgment result shows NORMAL, the system is normal.
If the judgment result shows ABNORMAL, the system has a malfunction.
If the judgment result shows INCOMPLETE, perform driving pattern again.
This vehicle performs FC system shutdown process after turning the ignition switch off from ON (READY). Therefore, after the ignition switch is turned off from ON (READY), do not perform any work on the electrical system for at least 10 minutes including removing connectors or disconnecting the negative (-) auxiliary battery terminal.
When the EV control ECU determines that the temperature of FC system components is below 0°C (32°F) when the vehicle is parked with the ignition switch off, it operates the FC air compressor, hydrogen pump and FC cooling water pump for a maximum of 180 seconds to drain the FC stack assembly. When performing inspection or repairs with the ignition switch off (not ON or ON (READY)), disconnect the cable from the negative (-) auxiliary battery terminal before performing work. (If the auxiliary battery voltage is needed to conduct inspection, perform the inspection in an environment with an ambient temperature of 10°C (50°F) or higher.)
Pre-procedure1
Enter the following menus: System Select / Health Check.
Procedure1
Check for DTCs.
| Result | Proceed to |
|---|---|
| EV control ECU outputs P253012. | A |
| EV control ECU does not output P253012. | B |
Post-procedure1
Turn the ignition switch off.
A
B
Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING