| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | BENCH TYPE REAR SEAT CUSHION ASSEMBLY | - | ( )
|
- | - |
| 2 | REAR SEAT CUSHION LOCK HOOK | 72693 | - | - | - |
| 3 | BENCH TYPE REAR SEATBACK ASSEMBLY | - | ( )
|
- | - |
| 4 | REAR SEATBACK HOLDER | 71398A | - | - | - |
| *1 | REAR SEAT OUTER BELT ASSEMBLY LH (FLOOR ANCHOR) | *2 | REAR SEAT OUTER BELT ASSEMBLY RH (FLOOR ANCHOR) |
| *3 | REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH (FLOOR ANCHOR) | - | - |
| ● | Non-reusable part | - | - |
| ● | Non-reusable part | - | - |
| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 17 | PACKAGE TRAY TRIM PANEL ASSEMBLY | 64330 | ( )
|
- | - |
| 18 | CHILD RESTRAINT SEAT TETHER ANCHOR COVER | 73717 | ( )
|
- | - |
| 19 | CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET | 73719 | - | - | - |
| *A | w/ Center Tether Anchor | - | - |
Move both front seats to the frontmost position and fold them forward.
72693
2.REMOVE REAR SEAT CUSHION LOCK HOOK
71398A
4.REMOVE REAR SEATBACK HOLDER
67918F
5.REMOVE REAR DOOR SCUFF PLATE INSIDE LH
67917F
6.REMOVE REAR DOOR SCUFF PLATE INSIDE RH
Use the same procedure described for the LH side.
62332A
7.REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH
|
|
Click hereVehicle Exterior>DOOR / HATCH>REAR DOOR OPENING TRIM WEATHERSTRIP>REMOVAL
62331A
8.REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH
Use the same procedure described for the LH side.
62552F
9.REMOVE REAR SEAT SIDE GARNISH LH
62551F
10.REMOVE REAR SEAT SIDE GARNISH RH
Use the same procedure described for the LH side.
62488A
11.REMOVE INNER ROOF SIDE GARNISH COVER LH
62487A
12.REMOVE INNER ROOF SIDE GARNISH COVER RH
Use the same procedure described for the LH side.
62480A
13.REMOVE INNER ROOF SIDE GARNISH ASSEMBLY LH
62470A
14.REMOVE INNER ROOF SIDE GARNISH ASSEMBLY RH
Use the same procedure described for the LH side.
62440
15.REMOVE ROOF SIDE RAIL GARNISH ASSEMBLY LH
62430
16.REMOVE ROOF SIDE RAIL GARNISH ASSEMBLY RH
Use the same procedure described for the LH side.
73717
18.REMOVE CHILD RESTRAINT SEAT TETHER ANCHOR COVER
|
Remove in this Direction | - | - |
Using moulding remover A, detach the claw.
Detach the guide and remove the 3 child restraint seat tether anchor covers as shown in the illustration.
73719
19.REMOVE CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET
| *A | w/ Center Tether Anchor | - | - |