Home › RESTRAINTS › SUPPLEMENTAL RESTRAINT SYSTEM › FRONT PASSENGER AIRBAG ASSEMBLY

FRONT PASSENGER AIRBAG ASSEMBLY > INSTALLATION

for Preparation Click here


CAUTION:
Be sure to read the precautionary notices concerning the SRS airbag system before servicing it (Click here).



1. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY


C130877
  1. Attach the 10 claws to install the front passenger airbag.



2. CONNECT INSTRUMENT PANEL WIRE ASSEMBLY


H043758E02
  1. Connect the connectors to the front passenger airbag.

    NOTICE:
    When handling the airbag connector, do not damage the airbag wire harness.



3. INSTALL INSTRUMENT PANEL SAFETY PAD
  1. Install the instrument panel (Click here).

    NOTICE:
    When handling the airbag connector, do not damage the airbag wire harness.



4. CONNECT PASSENGER AIRBAG CONNECTOR


H043757E02
  1. Connect the front passenger airbag connector.

    NOTICE:
    When handling the airbag connector, do not damage the airbag wire harness.



5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


6. PERFORM INITIALIZATION
  1. Perform initialization (Click here).

    NOTICE:
    Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.



7. CHECK SRS WARNING LIGHT
  1. Check the SRS warning light (Click here).