WIRELESS DOOR LOCK CONTROL SYSTEM (w/ Smart Key System) > HOW TO PROCEED WITH TROUBLESHOOTING |
| 1.VEHICLE BROUGHT TO WORKSHOP |
| |||||
| 2.INSPECT BATTERY VOLTAGE |
| |||||
| 3.INSPECT COMMUNICATION FUNCTION OF LARGE-SCALE MULTIPLEX COMMUNICATION SYSTEM (BEAN)* |
Using the Techstream, check if the Multiplex Communication System (MPX) is functioning normally (Click here).
| Result | Proceed to |
| MPX DTC is not output | A |
| MPX DTC is output | B |
|
| ||||
| |||||
| 4.CHECK FOR DTC* |
Check for DTCs (Click here) and note any codes that are output.
Delete the DTC.
Recheck for DTCs. Try to prompt the DTC by simulating the original activity that the DTC suggests.
| Result | Proceed to |
| DTC does not reoccur | A |
| DTC reoccurs | B |
|
| ||||
| |||||
| 5.PROBLEM SYMPTOMS TABLE |
| Result | Proceed to |
| Fault is not listed in problem symptoms table | A |
| Fault is listed in problem symptoms table | B |
|
| ||||
| |||||
| 6.OVERALL ANALYSIS AND TROUBLESHOOTING* |
Operation check (Click here)
DATA LIST / ACTIVE TEST (Click here)
Terminals of ECU (Click here)
Inspection (Click here)
| |||||
| 7.ADJUST, REPAIR OR REPLACE |
| |||||
| 8.CONFIRMATION TEST |
|
| ||||
|---|---|---|---|---|---|