Home › BRAKE › BRAKE CONTROL › ELECTRONICALLY CONTROLLED BRAKE SYSTEM

DTC    C1300    Skid Control ECU Malfunction

for Preparation Click here


DESCRIPTION

The skid control ECU outputs this DTC if malfunctions are found in the circuit inside the computer by self-diagnosis.

DTC No.
INF Code
DTC Detecting Condition
Trouble Area
C1300/-
-
Malfunction in skid control ECU
Skid control ECU

INSPECTION PROCEDURE

NOTICE:
When replacing the skid control ECU, perform initialization of linear solenoid valve and calibration (Click here).

1.CHECK DTC
  1. Clear the DTCs (Click here).

  1. Turn the power switch ON (READY).

  1. Check the same DTCs are recorded (Click here).
    Result 
    Result
    Proceed to
    DTC is output
    A
    DTC is not output
    B



B
PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEMS TABLE
A

REPLACE SKID CONTROL ECU