Home › BODY ELECTRICAL › OTHER SYSTEM › TELLTALE LIGHT

TELLTALE LIGHT > INSTALLATION



1. INSTALL TELLTALE LIGHT ASSEMBLY


B074056E05
  1. Attach the 2 claws to install the telltale light.

  1. Connect the connector.



2. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY
  1. Install the instrument panel (Click here).



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


4. PERFORM INITIALIZATION
  1. Perform initialization (Click here).

    NOTICE:
    Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.



5. CHECK SRS WARNING LIGHT
  1. Check the SRS warning light (Click here).